Superior Engineering manufactures a front sway bar bracket to add extra clearance over the Radius arms or Super Flex Arms.

When fitting aftermarket radius arms Arms commonly hit the sway bar bracket on the front of the chassis.

This can cause the ABS lines to be permanently damaged if they are squashed and will be an expensive repair bill.

These Brackets are a 100% bolt-on application with no modifying of chassis required.

When purchasing you will need to order sway bar extensions or disconnects 2 sizes larger than what your lift is.

If you have a 4-inch lift already fitted in your vehicle and you fit the sway bar Bracket you would need to order 6-inch extensions or disconnects.

NOTE: Not suitable for vehicles fitted with rear AC.

• The base plate is manufactured from 8mm steel.
• The folded section is manufactured in one piece 6mm steel.
• Supplied with socket head cap screws as well as other bolts for the base plate.
• Powder-coated for maximum protection.

SOLD AS A PAIR (2).

Supplied with:

• 2 x Brackets
• 4 x M12 Socket Head Bolts
• 4 x M12 Bolts
• 8 x M12 Spring Washers

The above image is a comparison showing our bracket (Right) and the 50mm lower standard bracket (Left).