Direct replacement for original UCA items

3 Degrees fixed caster correction

Greasable ball joint & rubber bushings

Suits front lifts from 30mm and above

• If Aftermarket rims are fitted, backspace must not be greater than the OE rim. It is the fitters responsibility to check for clearances.

• These UCA’s clear factory wheels and tyres which is a requirement for ADR compliance.

Outback Armour fixed position upper control arms are a direct replacement for the original vehicle items and provide significant improvements in the handling and performance of your lifted vehicle.

Outback Armour UCA's are engineered to provide:

• increased clearance of coil spring/tower at droop.

• 3 degrees of caster correction for steering geometry for better wheel alignments in lifted vehicles.

• greater clearance for fitment of larger offroad tyres.

Natural rubber bushings offer superior vibration dampening and durability over other commonly used materials such as polyurethane. UCA bolts should be tightened at ride height to allow for maximum directional flex of the bushings.

The fixed position greasable ball joints ensure that geometry is maintained for the life of fitment for durability and reliability in offroad terrain. Outback Armour ball joints are compatible with most original equipment and aftermarket ball joints.

Suits vehicles with front lifts from 30mm and above with larger tyres. Lifts above 65mm may result in premature wear of the ball joint and/or contact with the coil spring at full droop.

• If Aftermarket rims are fitted, backspace must not be greater than the OE rim. It is the fitters responsibility to check for clearances.

• These UCA’s clear factory wheels and tyres which is a requirement for ADR compliance.

Components

OASU3519001-F x 1 kit