JLM Underbody Spray (500ml)

• Superior rust and gravel protection
• Durable closed and elastic coating layer
• Drip-free, quick-drying application
• Sound dampening
• Can be over painted

Underbody Spray J04603 Black is an anti-gravel coat aerosol based on synthetic resins and rubbers. This coating is quick dry and is especially developed for a long-term gravel protection of front and rear spoilers, sills, side skirts, wheel arches, etc.

This product is thixotropic and can be applied drip-free. The product has a good adhesion and can be painted over with any kind of lacquer system when the film is completely dried. Drying can take place at room temperature or at elevated temperatures up to 60°C.

After application the result will be a closed, elastic and structured film with excellent rust- and gravel protection. Underbody Spray Black also reduces the noise inside cars because of the sound dampening/proofing properties.

Product Usage:

• Use at room temperature
• Shake before use
• Surface must be dry and clean, free from dirt, rust or grease
• Spray an even layer on the object of the surface to be coated
• Recommended thickness approximately 0.5mm at application
• Apply minimum two layers
• Allow to dry before over-painting
• Do not spray on the exhaust, brake system or engine parts
• For maximum corrosion protection, treat bare metal with an anti-corrosion primer before applying Underbody Spray
• After use, clean the nozzle by holding the can upside down and spraying until only gas (propellant) is coming out of the can
• Can be removed with aromatic solvents; white spirit, boiling point naphtha, xylene etc.