Land Rover Packs

Our Defender packs are designed with a number of options to best suit your vehicle.

All our Defender packs contain adequate Stage 1 Sound Deadener to treat the vehicle for vibration. Please note that this does not mean 100% coverage on all surfaces. Stage 1 Sound Deadener is a vibration dampening mat and not used to laminate the entire surface to minimise panel resonance.
These packs contain enough Insul-Layer to cover the complete roof skin of your vehicle. Please note, there is a single sheet included in the Perentie pack. If your Perentie is entirely canvas, this sheet can be used over the Stage 1 Sound Deadener in the doors.

The standard vinyl floor from factory is an effective sound blanket for the seated area of the vehicle. If your vinyl floor is in good condition and you are planning on retaining it, you don’t need any other product over the top of the Stage 1 Sound Deadener. If the vinyl floor is damaged, or simply not there, then we can supply our Sound Barrier Floor Mat to cover the seated area. Please note that there is a level of skill required to neatly upholster the seat area using this material. Each row of seating requires a 1950mm x 1350mm length of our Sound Barrier Floor Mat for coverage.

The rear cargo area is optional. If you want to cover this area, we suggest using our Sound Barrier Floor Mat as a durable finished sound blanket. The cargo area requires a 1950mm x 1350mm length, and an additional 950mm x 1350mm to cover both the floor and wheel arches.

Land Rover 130   (approx 30kg)
Included in every pack:
4 Boxes (7.2sq/m) of Stage 1 Sound Deadener -  Install on your floor pan, doors, rear firewal & roof skin as a vibration dampening mat to control panel resonance.
2 Sheets (2sq/m) of 6mm Insul-Layer - Light weight, closed cell, peel and stick foam, apply to roof skin as a thermal and acoustic barrier on your roof skin.
1 Box (1.7sq/m) of Acoustic Liner - Peel & stick, dual layer 12mm thick flexible foam to cover the rear firewall.
1 x Install kit - Includes 1 x application roller, 1 x utility knife, 1 x roll of foil tape

Additional layer:
Not retaining factory floor: (approx 30kg)
5.2sq/m of Sound Barrier Floor Mat - Stage 2 Sound barrier, apply to floorpan and seat boxes, To replace the factory vinyl in the seated area.
NOTE to fit this material you will require our spray grade contact adhesive, you can find it