The blow moulded universal caravan and RV water tank will change the way you use water tanks. This one 50L tank can be configured in many ways to provide a single low cost solution to your grey water or water storage requirements.
This tank is blow moulded from food contact approved High Molecular Weight High Density Polyethylene. This makes the tank a super tough performer. The tank is moulded with two integral 40mm (1.5” BSP) threaded female closures that can accept a wide variety of standard fixtures and fittings. Using these standard fittings the tank can be networked together to provide many water storage options for your vehicle.
Brackets are tailor-made to fit both tanks together.
Product features:
- Length: 698 x Width: 382 x Heght: 210mm
- Weight 2.5Kg
- 1.5 Inch (38mm) BSP Female Inlet & Outlet
- Brackets included
2 x Tanks
2 x Brackets
Please note brackets are not suitable for offroad conditions
Caravan & RV Water Tank Comparison
- Twin 50L tanks for longer stays
- High density polyethylene made to last
- Standard 1.5 inch BSP plumbing connections
- Brackets shaped to mount tanks together
- Low 210mm profile under most chassis
- On-road friendly setup for tourers
- Capacity: 50L per tank
- Quantity: 2 tanks included
- Material: High Molecular Weight High Density Polyethylene (food contact approved)
- Colour: Black
- Tank length: 698mm
- Tank width: 382mm
- Tank height: 210mm
- Tank weight: 2.5kg
- Inlet and outlet size: 1.5 inch (38mm) BSP female
- Closures: Two integral 40mm (1.5" BSP) threaded female closures per tank
- Mounting: Brackets tailor-made to fit both tanks together
- Usage: Suitable for fresh water or grey water storage
- Note: Brackets are not suitable for offroad conditions
- Warranty: Not specified
- 2 x 50L blow moulded water or grey water tanks
- 2 x tailor-made mounting brackets
| SKU | 200003X2-Bracketkit |
|---|---|
| Brand | Outback Explorer |
| Shipping Weight | 5.0000kg |
The blow moulded universal caravan and RV water tank will change the way you use water tanks. This one 50L tank can be configured in many ways to provide a single low cost solution to your grey water or water storage requirements.
This tank is blow moulded from food contact approved High Molecular Weight High Density Polyethylene. This makes the tank a super tough performer. The tank is moulded with two integral 40mm (1.5” BSP) threaded female closures that can accept a wide variety of standard fixtures and fittings. Using these standard fittings the tank can be networked together to provide many water storage options for your vehicle.
Brackets are tailor-made to fit both tanks together.
Product features:
- Length: 698 x Width: 382 x Heght: 210mm
- Weight 2.5Kg
- 1.5 Inch (38mm) BSP Female Inlet & Outlet
- Brackets included
2 x Tanks
2 x Brackets
Please note brackets are not suitable for offroad conditions
Caravan & RV Water Tank Comparison
- Twin 50L tanks for longer stays
- High density polyethylene made to last
- Standard 1.5 inch BSP plumbing connections
- Brackets shaped to mount tanks together
- Low 210mm profile under most chassis
- On-road friendly setup for tourers
- Capacity: 50L per tank
- Quantity: 2 tanks included
- Material: High Molecular Weight High Density Polyethylene (food contact approved)
- Colour: Black
- Tank length: 698mm
- Tank width: 382mm
- Tank height: 210mm
- Tank weight: 2.5kg
- Inlet and outlet size: 1.5 inch (38mm) BSP female
- Closures: Two integral 40mm (1.5" BSP) threaded female closures per tank
- Mounting: Brackets tailor-made to fit both tanks together
- Usage: Suitable for fresh water or grey water storage
- Note: Brackets are not suitable for offroad conditions
- Warranty: Not specified
- 2 x 50L blow moulded water or grey water tanks
- 2 x tailor-made mounting brackets
| SKU | 200003X2-Bracketkit |
|---|---|
| Brand | Outback Explorer |
| Shipping Weight | 5.0000kg |

More info