The Mean Mother Recovery Bag Large gives you one place for snatch straps, shackles and gloves with outside measurements of 50 cm long, 26 cm wide and 32 cm high. The bag slots neatly across most wagon cargo areas with at least 50 cm of depth so your recovery gear is not rolling around under feet. Dual handles stitched along the 50 cm body let you shift the whole kit in one grab. The outer shell uses tough fabric with reinforced panels along stress points so it handles the weight of several kilograms of steel hardware. A heavy duty zipper runs nearly the full 50 cm lid length for easy access to the base of the bag. The shoulder strap spans roughly 59 cm of drop when loaded so you can carry the kit from shed to vehicle without cutting into your shoulder. Side compartments use the 26 cm width for separate storage of smaller bits.
- Mean Mother large recovery bag
- Suitable for 4WD recovery gear or tools
- Approximate dimensions 50 cm x 26 cm x 32 cm
- Heavy duty zipper closure on main compartment
- Dual stitched carry handles for lifting
- Shoulder strap included for over-shoulder carry
- Tough fabric construction for frequent use
- Large main compartment with side pockets
- Ideal for keeping recovery gear organised
- Compact footprint for most wagon cargo areas
Q: Will this bag fit a full 4WD snatch strap kit?
Yes, the large recovery bag is sized for a typical snatch strap kit. The internal space matches the external dimensions of about 50 cm long, 26 cm wide and 32 cm high. That is enough room for a standard snatch strap, a couple of bow shackles and gloves. You can also add a small drag chain or tree trunk protector if they are coiled tightly.
Q: Can I store general tools in this recovery bag instead of straps?
Yes, you can use it as a tool bag. The 50 cm length and 26 cm width give enough room for socket sets, spanners and small power tools. The 32 cm height allows stacking organisers or cases. Just keep sharp metal edges away from the fabric by using inner pouches or plastic boxes.
Q: Does the bag have a shoulder strap as well as carry handles?
Yes, the bag includes both a shoulder strap and stitched carry handles. The shoulder strap helps when moving heavier recovery kits from the shed to the vehicle. The dual handles are handy for short lifts into the cargo area. Using both options spreads the load and makes shifting gear more comfortable.
Q: Is this bag suitable for use in open utes or only inside wagons?
The bag works in both utes and wagons. In a ute tray the 50 cm length sits neatly against the front board or wheel arch. The heavy duty zipper helps keep dust out when the bag is closed. In a wagon the 26 cm width means it fits well beside other storage boxes or a fridge slide.
- Large kit bag for recovery setups
- Heavy duty zipper copes with dust
- Strong handles make shifting gear easy
- Dimensions suit most wagon cargo areas
- Solid equipment that is made to last
- Product type: Recovery bag
- Size: Large
- Dimensions: 50 cm long
- Width: 26 cm
- Height: 32 cm
- Primary use: Storing 4WD recovery gear or tools
- Closure type: Heavy duty zipper
- Carry method: Dual carry handles and shoulder strap
1 x Mean Mother Recovery Bag - Large
| SKU | MMKITBAG2 |
|---|---|
| Barcode # | 9311902037799 |
| Brand | Mean Mother |
| Shipping Weight | 3.0000kg |
The Mean Mother Recovery Bag Large gives you one place for snatch straps, shackles and gloves with outside measurements of 50 cm long, 26 cm wide and 32 cm high. The bag slots neatly across most wagon cargo areas with at least 50 cm of depth so your recovery gear is not rolling around under feet. Dual handles stitched along the 50 cm body let you shift the whole kit in one grab. The outer shell uses tough fabric with reinforced panels along stress points so it handles the weight of several kilograms of steel hardware. A heavy duty zipper runs nearly the full 50 cm lid length for easy access to the base of the bag. The shoulder strap spans roughly 59 cm of drop when loaded so you can carry the kit from shed to vehicle without cutting into your shoulder. Side compartments use the 26 cm width for separate storage of smaller bits.
- Mean Mother large recovery bag
- Suitable for 4WD recovery gear or tools
- Approximate dimensions 50 cm x 26 cm x 32 cm
- Heavy duty zipper closure on main compartment
- Dual stitched carry handles for lifting
- Shoulder strap included for over-shoulder carry
- Tough fabric construction for frequent use
- Large main compartment with side pockets
- Ideal for keeping recovery gear organised
- Compact footprint for most wagon cargo areas
Q: Will this bag fit a full 4WD snatch strap kit?
Yes, the large recovery bag is sized for a typical snatch strap kit. The internal space matches the external dimensions of about 50 cm long, 26 cm wide and 32 cm high. That is enough room for a standard snatch strap, a couple of bow shackles and gloves. You can also add a small drag chain or tree trunk protector if they are coiled tightly.
Q: Can I store general tools in this recovery bag instead of straps?
Yes, you can use it as a tool bag. The 50 cm length and 26 cm width give enough room for socket sets, spanners and small power tools. The 32 cm height allows stacking organisers or cases. Just keep sharp metal edges away from the fabric by using inner pouches or plastic boxes.
Q: Does the bag have a shoulder strap as well as carry handles?
Yes, the bag includes both a shoulder strap and stitched carry handles. The shoulder strap helps when moving heavier recovery kits from the shed to the vehicle. The dual handles are handy for short lifts into the cargo area. Using both options spreads the load and makes shifting gear more comfortable.
Q: Is this bag suitable for use in open utes or only inside wagons?
The bag works in both utes and wagons. In a ute tray the 50 cm length sits neatly against the front board or wheel arch. The heavy duty zipper helps keep dust out when the bag is closed. In a wagon the 26 cm width means it fits well beside other storage boxes or a fridge slide.
- Large kit bag for recovery setups
- Heavy duty zipper copes with dust
- Strong handles make shifting gear easy
- Dimensions suit most wagon cargo areas
- Solid equipment that is made to last
- Product type: Recovery bag
- Size: Large
- Dimensions: 50 cm long
- Width: 26 cm
- Height: 32 cm
- Primary use: Storing 4WD recovery gear or tools
- Closure type: Heavy duty zipper
- Carry method: Dual carry handles and shoulder strap
1 x Mean Mother Recovery Bag - Large
| SKU | MMKITBAG2 |
|---|---|
| Barcode # | 9311902037799 |
| Brand | Mean Mother |
| Shipping Weight | 3.0000kg |

More info