The Clipsal 435VF15 flap kit sorts out those tired old 15 amp inlet covers on older vans with a 65mm opening. Instead of swapping the whole 240V inlet, you just change the front flap, spring and foam. That keeps the weather off the socket and stops road grime building up around your mains connection when you pull into powered sites.

The flap matches Clipsal’s old style 15A inlet shape and suits panels cut at 65mm diameter. You get the new flap, the return spring and a foam seal cut to suit the inlet housing. That means the existing 240V hardware and wiring stay put while you bolt on fresh front gear. For older caravans and campers, it is a smart buy that keeps proven electrical gear working longer.

• Genuine Clipsal replacement flap for 15A inlet
• Suits old style Clipsal power inlets pre-2006
• Intended for 240V caravan and RV inlets
• Includes flap, metal spring and foam seal
• Foam seal pre-cut for 65mm diameter hole
• Helps protect mains inlet from dust and spray
• Allows reuse of existing inlet body and wiring
• Simple mechanical swap for damaged covers
• Maintains original Clipsal look on van exterior
• Compact kit is easy to keep as spare

Q: Does this kit include everything on the front of the inlet?

It includes the flap, spring and foam seal only. The existing inlet body, socket and wiring stay in place on the van. This means you swap out just the worn cover parts. It keeps disruption to the electrical setup low while restoring the inlet face. It is suited to inlets that already match the Clipsal old style pattern.

Q: How can I check if my inlet is the old style this flap suits?

Measure the round cut-out and confirm it is about 65mm. The flap suits Clipsal 15A inlets supplied before 2006 with that size opening. If the inlet front looks different or the hole size is larger or smaller, this flap may not sit correctly. Matching the cut-out is important so the foam seal can compress properly against the panel.

Q: Do I need to touch any 240V wiring when fitting this flap?

You normally do not need to disturb wiring to fit the flap, spring and seal. The work is around the mechanical cover and mounting screws on the outside face. The inlet body that holds the 240V socket usually stays fixed to the van wall. If you are unsure around mains hardware, an electrician can confirm the setup is sound after fitting.

Q: Is the foam seal included cut to size?

Yes, the foam seal in the kit is supplied with a circular opening suited to a 65mm hole. The outer shape suits the flap frame footprint around the Clipsal inlet. This avoids trimming on site so the seal can sit flat behind the cover. A good seal helps reduce direct water tracks towards the 240V socket face.

Suits Clipsal old style 15A 240V power inlet assemblies manufactured before 2006. Designed as a direct replacement for the original flap on compatible caravan or RV external inlets that use a 65mm cut-out. Installation typically involves removing the existing damaged flap and reusing the existing inlet body and wiring while fitting the new flap, spring, and foam seal.