The Ark U Bolt Swivel Sidewind Jockey Stand runs a sidewinder handle with 250mm of lift so you can dial in drawbar height without crawling under the A-frame. The stand is rated to a 350kg static load, which covers most box trailers and smaller campers within that ball weight. The swivel bracket lets you flip the leg up parallel to the drawbar, keeping it clear once you hit highway speeds.
The steel tube body and welded base plate are sized to carry the full 350kg rating on decent ground or a timber chock. A U-bolt clamp locks the mount onto typical 50–75mm drawbars without extra welding. The mechanical screw and side handle give consistent 250mm travel with no fluid seals to worry about on dusty corrugations. If you want straightforward lifting gear that just works, this stand is a smart buy.
- Swivel side winder handle for controlled lifting
- Maximum height extension of 250mm (10 inches)
- Rated static load capacity of 350kg
- U-bolt style mount to secure on drawbar
- Swivel bracket allows stand to fold for travel
- Mechanical screw lift for precise height adjustment
- Flat base plate spreads load on firm surfaces
- Suits small trailers and camper drawbars within rating
- Simple steel construction for straightforward maintenance
- Ideal for stabilising and levelling parked trailers
Q: What drawbar sizes will the Ark U Bolt Swivel Sidewind Jockey Stand fit?
The stand is designed to mount with U-bolts to typical trailer drawbars within the bracket range. The clamp style works with standard box trailer and camper A-frames. For unusual or heavy-section drawbars, measure the height and width against the bracket slots. If the bar sits outside that envelope, you may need a different style mount.
Q: Can this jockey stand stay on the trailer while towing?
Yes, the swivel bracket lets you rotate the stand horizontally for travel. Once swung up, the leg should lock firmly so it cannot drop during a trip. Always check the locking pin or mechanism before moving off. A quick walk-around before towing helps catch any gear left down.
Q: Is the 350kg rating for the whole trailer weight?
No, the 350kg figure is the maximum static load on the stand at the drawbar. The total trailer weight will be higher because only part of it sits on the jockey point. Staying under the rated drawbar load helps protect the screw and tube. Overloading can bend components or strip threads.
Q: Do I need to service the sidewind mechanism regularly?
Light maintenance will help the stand last longer. A small amount of suitable grease on the screw thread and handle bushes keeps the lift smooth. Avoid high-pressure cleaning directly into the mechanism so grit does not pack into the moving parts. A quick check for rust or damage before trips is usually enough for regular use.
- Sidewind handle keeps knuckles clear
- 250mm lift handles uneven sites
- 350kg load rating for safety margin
- U-bolt clamp fits standard drawbars
- Swivel action speeds pack-up time
- Solid stand for weekend after weekend
- Swivel side winder handle
- Maximum height extension: 250mm (10")
- Load capacity: 350kg
- Mount type: U-bolt swivel jockey stand
| SKU | JS35SU_051369 |
|---|---|
| Brand | Ark |
| Shipping Weight | 6.0000kg |
| Assembled Length | 0.200m |
| Assembled Height | 0.200m |
| Assembled Width | 0.100m |
More infoMake 4 payments of $19.00 over 8 weeks and get it now!
Calculate Shipping
The Ark U Bolt Swivel Sidewind Jockey Stand runs a sidewinder handle with 250mm of lift so you can dial in drawbar height without crawling under the A-frame. The stand is rated to a 350kg static load, which covers most box trailers and smaller campers within that ball weight. The swivel bracket lets you flip the leg up parallel to the drawbar, keeping it clear once you hit highway speeds.
The steel tube body and welded base plate are sized to carry the full 350kg rating on decent ground or a timber chock. A U-bolt clamp locks the mount onto typical 50–75mm drawbars without extra welding. The mechanical screw and side handle give consistent 250mm travel with no fluid seals to worry about on dusty corrugations. If you want straightforward lifting gear that just works, this stand is a smart buy.
- Swivel side winder handle for controlled lifting
- Maximum height extension of 250mm (10 inches)
- Rated static load capacity of 350kg
- U-bolt style mount to secure on drawbar
- Swivel bracket allows stand to fold for travel
- Mechanical screw lift for precise height adjustment
- Flat base plate spreads load on firm surfaces
- Suits small trailers and camper drawbars within rating
- Simple steel construction for straightforward maintenance
- Ideal for stabilising and levelling parked trailers
Q: What drawbar sizes will the Ark U Bolt Swivel Sidewind Jockey Stand fit?
The stand is designed to mount with U-bolts to typical trailer drawbars within the bracket range. The clamp style works with standard box trailer and camper A-frames. For unusual or heavy-section drawbars, measure the height and width against the bracket slots. If the bar sits outside that envelope, you may need a different style mount.
Q: Can this jockey stand stay on the trailer while towing?
Yes, the swivel bracket lets you rotate the stand horizontally for travel. Once swung up, the leg should lock firmly so it cannot drop during a trip. Always check the locking pin or mechanism before moving off. A quick walk-around before towing helps catch any gear left down.
Q: Is the 350kg rating for the whole trailer weight?
No, the 350kg figure is the maximum static load on the stand at the drawbar. The total trailer weight will be higher because only part of it sits on the jockey point. Staying under the rated drawbar load helps protect the screw and tube. Overloading can bend components or strip threads.
Q: Do I need to service the sidewind mechanism regularly?
Light maintenance will help the stand last longer. A small amount of suitable grease on the screw thread and handle bushes keeps the lift smooth. Avoid high-pressure cleaning directly into the mechanism so grit does not pack into the moving parts. A quick check for rust or damage before trips is usually enough for regular use.
- Sidewind handle keeps knuckles clear
- 250mm lift handles uneven sites
- 350kg load rating for safety margin
- U-bolt clamp fits standard drawbars
- Swivel action speeds pack-up time
- Solid stand for weekend after weekend
- Swivel side winder handle
- Maximum height extension: 250mm (10")
- Load capacity: 350kg
- Mount type: U-bolt swivel jockey stand
| SKU | JS35SU_051369 |
|---|---|
| Brand | Ark |
| Shipping Weight | 6.0000kg |
| Assembled Length | 0.200m |
| Assembled Height | 0.200m |
| Assembled Width | 0.100m |
