This Breha V-Type Table Leg at 705mm height gives your caravan table a solid spot to land without cluttering the floor with extra posts. The V-shape runs back to the wall so you can still swing your feet under a table up to around 700mm deep. A squeeze latch lets you fold the leg and drop the table out of the way when you want more room to load gear or walk through.
The leg bolts to the table underside with a plate that has 4 predrilled holes, so you can use standard timber screws sized to your top. Steel construction suits the bumps and flex that come with corrugated roads and campsite setups. Pair it with a wall rail rated for caravan furniture and you have a smart buy for simple, repeatable installs. This kit lines up well with typical Aussie touring layouts.
- Breha V-Type table leg for caravans and RVs
- Fixed height of 705mm for table support
- V-style frame suits wall-supported tables
- Four predrilled screw holes in mounting plate
- Squeeze mechanism allows simple adjustment and folding
- Helps keep caravan floor area clear under the table
- Suits refits from pedestal bases to wall-mounted layouts
- Compatible with timber or composite table tops
- Steel construction suitable for touring use
- Compact design folds away with the table when not needed
Q: Can this V-Type table leg be used on any caravan table top?
Yes, as long as the table top is strong enough for screw mounting and the size suits the 705mm leg height. Most caravan tops in ply or composite handle standard wood screws into at least 16mm thickness. Check that the table depth allows the V-frame to clear the wall when folded. Always confirm screw length so you do not break through the top surface.
Q: Does the leg lock in place when it is folded down for use?
Yes, the leg is held in position by the squeeze-adjust mechanism. When you release the squeeze handle, the leg sits against its stop and supports the table. Always confirm that the latch is fully engaged before putting weight on the edge. Give the table a firm push test after fitting. Recheck fittings after your first few trips.
Q: Is this leg suitable for use with free-standing tables outside the caravan?
No, this leg is intended for wall-supported caravan or RV tables. The design expects the wall or side rail to carry some of the load. A free-standing table normally needs a central pedestal or multiple legs. Using this leg without proper wall support may lead to poor stability. Stick with purpose-made outdoor table frames for loose furniture.
Q: Can I retrofit this leg to replace a pedestal base in an existing layout?
Yes, many refits change from a pedestal to a wall-supported V-type leg to open floor space. You will need a compatible wall rail or bracket to support the table edge. Check that the 705mm height still lines up with your seat cushions. You may need to patch or cover the old pedestal mounting point in the floor after removal.
- V-frame supports wall-mounted tables
- 705mm suits common caravan layouts
- Four-hole plate speeds up fitting
- Squeeze latch makes folding straightforward
- Built tough enough for touring use
- Height: 705mm
- Style: V-type table leg
- Mounting: 4 predrilled screw holes
- Adjustment mechanism: squeeze to adjust
- Application: caravan and RV table support
| SKU | 400-02412 |
|---|---|
| Barcode # | 400-02412 |
| Brand | Breha |
| Shipping Weight | 0.7500kg |
More info
This Breha V-Type Table Leg at 705mm height gives your caravan table a solid spot to land without cluttering the floor with extra posts. The V-shape runs back to the wall so you can still swing your feet under a table up to around 700mm deep. A squeeze latch lets you fold the leg and drop the table out of the way when you want more room to load gear or walk through.
The leg bolts to the table underside with a plate that has 4 predrilled holes, so you can use standard timber screws sized to your top. Steel construction suits the bumps and flex that come with corrugated roads and campsite setups. Pair it with a wall rail rated for caravan furniture and you have a smart buy for simple, repeatable installs. This kit lines up well with typical Aussie touring layouts.
- Breha V-Type table leg for caravans and RVs
- Fixed height of 705mm for table support
- V-style frame suits wall-supported tables
- Four predrilled screw holes in mounting plate
- Squeeze mechanism allows simple adjustment and folding
- Helps keep caravan floor area clear under the table
- Suits refits from pedestal bases to wall-mounted layouts
- Compatible with timber or composite table tops
- Steel construction suitable for touring use
- Compact design folds away with the table when not needed
Q: Can this V-Type table leg be used on any caravan table top?
Yes, as long as the table top is strong enough for screw mounting and the size suits the 705mm leg height. Most caravan tops in ply or composite handle standard wood screws into at least 16mm thickness. Check that the table depth allows the V-frame to clear the wall when folded. Always confirm screw length so you do not break through the top surface.
Q: Does the leg lock in place when it is folded down for use?
Yes, the leg is held in position by the squeeze-adjust mechanism. When you release the squeeze handle, the leg sits against its stop and supports the table. Always confirm that the latch is fully engaged before putting weight on the edge. Give the table a firm push test after fitting. Recheck fittings after your first few trips.
Q: Is this leg suitable for use with free-standing tables outside the caravan?
No, this leg is intended for wall-supported caravan or RV tables. The design expects the wall or side rail to carry some of the load. A free-standing table normally needs a central pedestal or multiple legs. Using this leg without proper wall support may lead to poor stability. Stick with purpose-made outdoor table frames for loose furniture.
Q: Can I retrofit this leg to replace a pedestal base in an existing layout?
Yes, many refits change from a pedestal to a wall-supported V-type leg to open floor space. You will need a compatible wall rail or bracket to support the table edge. Check that the 705mm height still lines up with your seat cushions. You may need to patch or cover the old pedestal mounting point in the floor after removal.
- V-frame supports wall-mounted tables
- 705mm suits common caravan layouts
- Four-hole plate speeds up fitting
- Squeeze latch makes folding straightforward
- Built tough enough for touring use
- Height: 705mm
- Style: V-type table leg
- Mounting: 4 predrilled screw holes
- Adjustment mechanism: squeeze to adjust
- Application: caravan and RV table support
| SKU | 400-02412 |
|---|---|
| Barcode # | 400-02412 |
| Brand | Breha |
| Shipping Weight | 0.7500kg |
