The SPAL High-Performance Racing Puller Fan with a 16 inch diameter is solid gear for keeping coolant temps in check when you push the car hard. The 12 volt motor hooks into standard wiring so you can run it with a relay and thermo switch to suit your setup. The puller layout sits behind the radiator and drags air through the core, handy when the viscous fan struggles at low road speeds.

This fan comes in the SPAL VA18-AP70/LL/F-59A spec, so you know exactly what you are fitting when ordering brackets or shrouds. The plastic blade and housing keep weight sensible for front end setups that already carry winches and bars. The sealed motor helps it deal with dust and water crossings without constant cleaning. It is smart buy gear for anyone keen to get out there without stressing about heat soak.

• SPAL High-Performance Racing Puller Fan
• 16 inch diameter electric cooling fan
• 12 volt motor suits common 4WD systems
• Puller configuration for behind-radiator fitment
• Slim profile housing for tight engine bays
• Sealed motor construction helps resist dust
• Plastic blade and shroud to reduce weight
• Model code VA18-AP70/LL/F-59A for reference
• Suitable for custom and racing cooling setups
• Ideal for auxiliary radiator or cooler airflow

Q: Can this SPAL 16 inch fan be used as a pusher instead of a puller?

No, this model is supplied as a puller fan. This VA18-AP70/LL/F-59A unit is built to sit behind the radiator and draw air through the core. Blade pitch and shroud shape are set up for that direction. For pusher use you would normally choose a matching SPAL pusher model instead.

Q: What wiring setup is recommended for this 12 volt racing fan?

Use a fused relay circuit controlled by a switch or thermo switch. High output electric fans can draw significant current on start-up. Running the fan through a relay keeps the load off dash switches and factory wiring. A thermo switch in the top tank or hose then cuts the fan in at your chosen temperature.

Q: Is this fan suitable for auxiliary cooling, like oil or transmission coolers?

Yes, it can be used on suitable sized coolers. As long as the cooler core area matches the 16 inch fan sweep, airflow coverage will be effective. Many builders mount this style of fan directly to stand-alone coolers using brackets. Always check cooler frame strength before attaching any fan.

Q: How should the fan be mounted to avoid radiator damage?

Use proper brackets or side mounts rather than cable ties through the core. Bracket mounting spreads the load to tanks or support panels instead of delicate fins and tubes. This approach reduces vibration transfer into the core. It also makes removal and servicing much simpler over the life of the setup.