Outback Explorer Magnesium Suburban Hot Water Anode Three Pack
Extend the life of your Suburban Hot Water heater with this magnesium rod. This anode rod is designed to protect the integrity of your suburban water tank by prolonging the life the inside.
All Suburban RV Hot Water Systems have an anode rod that absorbs all the corrosive action of hot water. It is located on the bottom of the Hot Water System under the main burner. To install, unscrew this to drain the tank of water and if the rod is mostly eaten away, replace it with a new one!
Please be aware that some imitation anode rods can cause damage to your Suburban HWS.
- Thread comes pre-taped with plumber's tape for maximum convenience
- 3/4" NPT - suitable for Suburban hot water systems
- 215mm x 21mm - 30% larger diameter rod for longer service intervals
- Commercial grade stainless steel core - sacrificial magnesium outer layer
- Three-pack keeps your setup ready
- 215mm rods suit Suburban hot water
- 21mm diameter gives extra protection mass
- Pre-taped thread saves time on site
- Stainless core stands up to heat cycles
- Magnesium outer takes the corrosion first
- Type: Hot water anode rod
- Application: Suburban RV hot water systems
- Quantity: 3-pack
- Thread size: 3/4" NPT
- Rod length: 215mm
- Rod diameter: 21mm
- Diameter increase: 30% larger than standard rods
- Core material: Commercial grade stainless steel
- Sacrificial layer material: Magnesium
- Thread seal: Pre-taped with plumber’s tape
- Location in system: Bottom of Suburban hot water system under main burner
- 3 x Outback Explorer magnesium Suburban hot water anode rods (215mm x 21mm) with 3/4" NPT threaded ends pre-taped with plumber's tape
| SKU | TTHWA_X3-KT |
|---|---|
| Brand | Outback Explorer |
| Shipping Weight | 0.5000kg |
Outback Explorer Magnesium Suburban Hot Water Anode 3 PK
More infoMake 4 payments of $6.97 over 8 weeks and get it now!
Calculate Shipping
Outback Explorer Magnesium Suburban Hot Water Anode Three Pack
Extend the life of your Suburban Hot Water heater with this magnesium rod. This anode rod is designed to protect the integrity of your suburban water tank by prolonging the life the inside.
All Suburban RV Hot Water Systems have an anode rod that absorbs all the corrosive action of hot water. It is located on the bottom of the Hot Water System under the main burner. To install, unscrew this to drain the tank of water and if the rod is mostly eaten away, replace it with a new one!
Please be aware that some imitation anode rods can cause damage to your Suburban HWS.
- Thread comes pre-taped with plumber's tape for maximum convenience
- 3/4" NPT - suitable for Suburban hot water systems
- 215mm x 21mm - 30% larger diameter rod for longer service intervals
- Commercial grade stainless steel core - sacrificial magnesium outer layer
- Three-pack keeps your setup ready
- 215mm rods suit Suburban hot water
- 21mm diameter gives extra protection mass
- Pre-taped thread saves time on site
- Stainless core stands up to heat cycles
- Magnesium outer takes the corrosion first
- Type: Hot water anode rod
- Application: Suburban RV hot water systems
- Quantity: 3-pack
- Thread size: 3/4" NPT
- Rod length: 215mm
- Rod diameter: 21mm
- Diameter increase: 30% larger than standard rods
- Core material: Commercial grade stainless steel
- Sacrificial layer material: Magnesium
- Thread seal: Pre-taped with plumber’s tape
- Location in system: Bottom of Suburban hot water system under main burner
- 3 x Outback Explorer magnesium Suburban hot water anode rods (215mm x 21mm) with 3/4" NPT threaded ends pre-taped with plumber's tape
| SKU | TTHWA_X3-KT |
|---|---|
| Brand | Outback Explorer |
| Shipping Weight | 0.5000kg |
