The Mean Mother Peak ATV 2000lb Wire Cable Winch gives your quad or side by side a solid 2000 lb of straight line pull for getting out of shallow bogs and ruts. The 12V setup ties straight into a typical ATV system running at 12 V so you can haul the bike or a small trailer up short pinches. The compact body at roughly 320 mm long works well on narrow racks and bars.

The steel frame and drum pair with a multi strand wire rope built around the 907 kg rating so the kit can handle regular weekend recoveries. The mounting base spans about 105 mm wide with bolt centres that suit common ATV winch plates, making it a smart buy for basic setups. The hook and strap are sized for lighter tow points using around 10–12 mm hardware, so you can get out there with gear that matches small vehicle loads.

• Mean Mother Peak ATV 2000lb electric winch
• Rated line pull of 2000 lb (approx. 907 kg)
• Wire cable configuration for abrasion resistance
• Compact and lightweight for ATV and UTV use
• Suits 12V electrical systems common on ATVs
• Steel frame construction for strength and durability
• Mounting base sized for standard ATV winch plates
• Includes wire rope drum with recovery hook and strap
• Ideal for light vehicle recovery and utility pulling
• Limited 12 month warranty from Mean Mother

Q: What vehicles suit the Mean Mother Peak ATV 2000lb wire winch?

This winch suits smaller vehicles like ATVs and UTVs that run a 12V electrical system. The compact footprint works well on front racks and purpose winch mounts. For heavier 4x4 wagons or dual cabs a higher capacity winch is usually chosen. Always match the winch rating to the loaded weight of the vehicle.

Q: Can this 2000lb winch be used for general utility pulling on the property?

Yes, within its 2000lb rated line pull it can be used for straight pulls such as moving small trailers or equipment. Keep the line as straight as possible and avoid shock loading the cable. Use rated snatch blocks and anchor points if you need to change direction. Never exceed the stated 2000lb capacity.

Q: Does a 2000lb winch need a dedicated winch mount plate on an ATV?

In most cases yes, a dedicated winch plate or bracket gives the frame enough support. Bolting directly to thin sheet metal or plastic racks can cause damage. A proper plate spreads the load across stronger chassis points. Check your ATV or UTV for compatible mounting kits before purchase.

Q: How often should the wire cable be inspected on this winch?

The wire cable should be checked before and after each use. Look for broken strands, flat spots or kinks along the entire length. Damage like this weakens the line and reduces the safe working load. Replace the cable as soon as any serious wear is found to keep the gear working properly.

Mean Mother Peak ATV 2000lb Winch – Synthetic Rope variant available under related products.

Suitable for ATV and UTV vehicle mounting where a 12V 2000 lb winch is required. Compact and lightweight housing suits smaller front racks and dedicated ATV winch mounting plates. Check available chassis space against winch dimensions shown in the supplied diagram before installation. Wiring and mounting hardware should be matched to a 12V 2000 lb ATV winch setup.