The Boab 12mm Hose Kit to suit Tuff Terrain Tanks gives you a tap on the end of a 1.5 m hose so you can rinse off at the car instead of at the tank. The 12 mm internal diameter keeps the flow steady enough for washing hands or boots without wasting a 40 L tank in one go. The kit lines up with common Tuff Terrain outlets so it plugs straight into that touring setup. The clear hose runs 1.5 m so you can stand beside the vehicle and still reach the ground. The hose bore stays at 12 mm, which matches the tap body and clamps for a snug fit. The tap uses a compact lever and metal body where it clamps to the hose so it sits out of the way in a packed footwell. The hardware handles typical Aussie heat around 40°C without going stiff or brittle too quickly.

• Suits Tuff Terrain style water tanks
• 12mm internal diameter clear hose
• 1.5m hose length from tank to outlet
• Supplied tap at hose end for control
• Includes clamps to secure hose fittings
• Compatible with common 4x4 water setups
• Clear hose wall shows water movement
• Compact kit coils for easy storage
• Boab branded touring water accessory

Q: What hose size does this kit use?

This kit uses 12mm hose. That 12mm internal diameter lines up with the outlet fittings on Tuff Terrain style tanks. Matching the size helps keep joints secure under vibration. It also gives a steady flow rate suited to hand and gear washing.

Q: How long is the hose in this kit?

The hose length is 1.5m. That length is enough to reach from a tank in the footwell or cargo area to the ground beside the vehicle. It keeps the run short so pressure from a gravity-fed tank is not wasted. It also coils neatly for storage when not in use.

Q: Does this kit include the tap and clamps?

Yes it includes a tap and clamps. The tap fits directly to the 12mm hose so you get flow control at the outlet end. The clamps secure the hose to your tank outlet and tap connections. Having matching hardware in the kit saves chasing odd sizes at the hardware store.

Q: What is this hose kit mainly used for?

This kit is mainly used for drawing water from Tuff Terrain tanks. Campers use it for rinsing feet and hands at the car. It also suits general campsite jobs like filling smaller containers. The clear hose lets you quickly see that water is flowing as expected.

This hose kit suits Tuff Terrain water tanks with a 12mm outlet connection. Installation requires attaching the 12mm hose to the tank outlet and securing it with the supplied hose clamps. The tap assembly mounts on the hose end to control water flow. The kit is intended for use with Tuff Terrain style vehicle-mounted water tanks commonly fitted in 4x4 tourers.