This Wildtrak Drinking Water Hose at 20m length sorts the distance from park tap to caravan inlet so you can set the van where it suits shade or level ground. A 16mm internal diameter keeps flow up for sinks and basic camp showers over the full 20m run. Dual layer walls and heavy duty external piping handle regular hook-ups on concrete slabs, gravel pads and dusty roadside stops.

The hose uses BPA free material along its 20m length so it is suited to drinking water transfer in caravan and RV setups. Female fittings sized to the 16mm hose connect with common garden-style hardware, making this a smart buy for standard 12V pump or mains-pressure feeds. The gear coils down neatly so you can get out there from coast to campsite without chewing up storage space.

• Wildtrak drinking water hose for caravans and RVs
• 20m hose length to reach distant taps
• 16mm internal diameter for steady flow
• Dual layer construction for added wall strength
• Heavy duty external piping for abrasion resistance
• BPA free materials suitable for drinking water transfer
• Supplied with female hose fittings for connections
• Additional connector included for compatible hardware
• Flexible hose coils for compact storage
• Suits typical mains or pump-fed water setups

Q: Can this hose be used with standard garden tap fittings?

Yes, this hose includes female fittings that suit common garden-style connections. The supplied fittings allow you to attach the 16mm hose to standard outdoor taps found at caravan parks and home driveways. This makes it straightforward to hook your van or RV up at most powered sites. You can also pair it with compatible adapters if your setup already uses quick-connect hardware.

Q: Is the hose suitable for long-term outdoor storage at a campsite?

The hose is built with a heavy duty external piping layer that is suited to outdoor use. It can be left connected across a typical campsite stay without needing to be packed away each day. Coiling it loosely instead of tight kinks will help maintain the 16mm internal diameter. Stowing it out of direct sun when you leave camp will further extend hose life.

Q: What internal diameter fittings or accessories should I match with this hose?

Match fittings and accessories that are compatible with a 16mm hose. This includes joiners, splitters or pressure regulators sized for 16mm internal diameter hose bodies. Using the correct size keeps connections secure and flow consistent across the full 20m length. Undersized or oversized fittings can restrict flow or make joints prone to leaks.

Q: Is this hose suitable for use with caravan or RV tanks that use 12V pumps?

Yes, the 16mm diameter and dual layer wall suit typical low to moderate pressures from 12V water pumps. The hose can run between your mains water inlet and tank fill or directly to a regulated supply line. Keeping the full 20m length free of sharp bends helps your pump move water with less strain. Always follow the pump manufacturer’s stated pressure limits when planning your plumbing layout.