This Stand At Ease wasp stopper caps the external caravan water inlet so insects cannot move into the open bore while the van sits parked. The gear slides over the inlet collar and the red plug pushes into the water opening, which works well when the van lives beside the house or in a storage yard. You get a simple barrier in place so nests do not build up between trips and block the next connection.
The stopper runs a moulded plastic body with a bright red end plug that stands out beside the drawbar and rear bar. The shape suits standard caravan inlets like the ones you see in the photos and fits by hand over the existing fitting. The light construction means the gear does not strain plastic threads or flanges. It is a smart buy if your setup spends long stretches off the road.
- Stand At Ease brand wasp stopper
- Blocks wasps and bugs from caravan water inlet
- Fits over existing external inlet fitting
- Red cap plugs the water opening securely
- Suits caravans parked at home or on site
- Helps prevent nests inside the water line
- Moulded plastic body for outdoor use
- Lightweight design avoids stressing inlet threads
- Hand installed and removed without tools
- Bright colour makes the cap easy to spot
Q: What size caravan inlets will this wasp stopper suit?
It suits standard caravan external water inlets as shown. Most vans use a common style of inlet with a round collar similar to the photos. The stopper body slips over that collar and the plug fits into the bore. Always compare your fitting visually before buying. If your inlet looks different it may not suit this gear.
Q: Can I leave the Stand At Ease Wasp Stopper fitted during heavy rain?
Yes, it can stay in place during rain. The moulded plastic body and plug are made for outdoor exposure. Rainwater will generally run off the smooth surfaces. It is still worth checking the cap after bad weather. A quick wipe or rinse keeps the inlet area tidy.
Q: Will the stopper affect the pressure or flow of my water supply?
No, it only blocks flow while fitted. The plug seals the opening so no water can pass when it is in place. Once you remove the stopper the inlet returns to normal operation. There are no valves or restrictors left behind. The hose then connects directly to the original fitting.
Q: How should I store the wasp stopper when the hose is connected?
Keep it clean and dry in an accessible spot. Many caravanners drop it in a nearby hatch or toolbox while the inlet is in use. Avoid leaving it on the ground where grit and ants can collect on the plug. Give it a quick rinse before refitting. Regular care helps the gear last longer.
- Suits caravan external water inlet connections as shown in images
- Gear slides over existing inlet fitting
- Cap pushes into exposed opening of water inlet
- User confirms size against existing caravan inlet before purchase
- No additional brackets or tools required under normal use
- Removal required before connecting hose to water inlet
- Handy cap for caravan water fittings
- Helps stop wasp nests between trips
- No tools needed for daily use
- Smart buy for long term storage
- Brand: Stand At Ease
- Product type: caravan water inlet wasp stopper
- Primary use: blocks wasps and insects from caravan water inlet
- Suitable location: caravan external water inlet point
- Construction: moulded plastic body and cap
- Colour: blue body with red plug
- Compatibility: standard caravan water inlet fittings as shown in images
- Warranty: not specified
- 1 x Stand At Ease Wasp Stopper
| SKU | wasp-stopper |
|---|---|
| Barcode # | OEBC695736 |
| Brand | Stand At Ease |
| Shipping Weight | 0.2000kg |
More info
This Stand At Ease wasp stopper caps the external caravan water inlet so insects cannot move into the open bore while the van sits parked. The gear slides over the inlet collar and the red plug pushes into the water opening, which works well when the van lives beside the house or in a storage yard. You get a simple barrier in place so nests do not build up between trips and block the next connection.
The stopper runs a moulded plastic body with a bright red end plug that stands out beside the drawbar and rear bar. The shape suits standard caravan inlets like the ones you see in the photos and fits by hand over the existing fitting. The light construction means the gear does not strain plastic threads or flanges. It is a smart buy if your setup spends long stretches off the road.
- Stand At Ease brand wasp stopper
- Blocks wasps and bugs from caravan water inlet
- Fits over existing external inlet fitting
- Red cap plugs the water opening securely
- Suits caravans parked at home or on site
- Helps prevent nests inside the water line
- Moulded plastic body for outdoor use
- Lightweight design avoids stressing inlet threads
- Hand installed and removed without tools
- Bright colour makes the cap easy to spot
Q: What size caravan inlets will this wasp stopper suit?
It suits standard caravan external water inlets as shown. Most vans use a common style of inlet with a round collar similar to the photos. The stopper body slips over that collar and the plug fits into the bore. Always compare your fitting visually before buying. If your inlet looks different it may not suit this gear.
Q: Can I leave the Stand At Ease Wasp Stopper fitted during heavy rain?
Yes, it can stay in place during rain. The moulded plastic body and plug are made for outdoor exposure. Rainwater will generally run off the smooth surfaces. It is still worth checking the cap after bad weather. A quick wipe or rinse keeps the inlet area tidy.
Q: Will the stopper affect the pressure or flow of my water supply?
No, it only blocks flow while fitted. The plug seals the opening so no water can pass when it is in place. Once you remove the stopper the inlet returns to normal operation. There are no valves or restrictors left behind. The hose then connects directly to the original fitting.
Q: How should I store the wasp stopper when the hose is connected?
Keep it clean and dry in an accessible spot. Many caravanners drop it in a nearby hatch or toolbox while the inlet is in use. Avoid leaving it on the ground where grit and ants can collect on the plug. Give it a quick rinse before refitting. Regular care helps the gear last longer.
- Suits caravan external water inlet connections as shown in images
- Gear slides over existing inlet fitting
- Cap pushes into exposed opening of water inlet
- User confirms size against existing caravan inlet before purchase
- No additional brackets or tools required under normal use
- Removal required before connecting hose to water inlet
- Handy cap for caravan water fittings
- Helps stop wasp nests between trips
- No tools needed for daily use
- Smart buy for long term storage
- Brand: Stand At Ease
- Product type: caravan water inlet wasp stopper
- Primary use: blocks wasps and insects from caravan water inlet
- Suitable location: caravan external water inlet point
- Construction: moulded plastic body and cap
- Colour: blue body with red plug
- Compatibility: standard caravan water inlet fittings as shown in images
- Warranty: not specified
- 1 x Stand At Ease Wasp Stopper
| SKU | wasp-stopper |
|---|---|
| Barcode # | OEBC695736 |
| Brand | Stand At Ease |
| Shipping Weight | 0.2000kg |
