The Camec Quick Connector Kit-Vac PK hooks a 3 inch black water hose to a bayonet outlet so you can tackle holding tank dumps without loose fittings. The plastic adapter grips a standard 3 inch hose wall while the bayonet end locks to common RV outlets used on many vans. Two clamps keep the setup tight so you can get out there and clear the tank at the next dump point.

The kit uses plastic bodies to keep weight down around the 3 inch connection while still handling typical black water use. Metal hose clamps wrap around the hose with worm-drive adjustment over a few millimetres of range for a snug seal. The black colour matches most waste hose gear so the setup looks tidy under the van. Straightforward parts mean quick checks and replacements in a basic toolbox setup.

• Camec Quick Connector Kit-Vac PK for caravan and RV waste systems
• Supplied with 3 inch hose adapter for common black water hoses
• Includes bayonet fitting to match many holding tank outlets
• Two hose clamps included for securing adapter and fitting to hose
• Plastic construction keeps fittings light and corrosion resistant
• Black colour matches typical waste hose and pipe hardware
• Suitable for maintaining or upgrading existing black water connections
• Compact components store easily in service hatches or toolboxes
• Classified as a holding tank accessory fitting in caravan plumbing
• Ideal backup connector kit for touring spares

Q: Does this kit fit a standard 3 inch caravan waste hose?

Yes, the kit is supplied with a 3 inch hose adapter. The adapter is sized to suit hoses with a nominal 3 inch internal diameter, which is typical for many RV black water systems. Check your existing hose size before fitting. The included clamps give adjustment to fine-tune the grip on the hose wall.

Q: What material are the fittings made from?

The fittings are made from plastic. This keeps the kit light and resistant to corrosion from black water. Plastic components also handle vibration in caravan use without rusting. The clamps themselves use metal bands to hold the plastic fittings to the hose.

Q: Is this kit suitable as a replacement for worn tank outlet fittings?

Yes, it can be used to replace worn hose-to-outlet connections that match a 3 inch hose and bayonet-style outlet. The kit provides both the hose adapter and the bayonet fitting in one pack. This helps restore a firm connection at the dump point. Always confirm your outlet uses a bayonet interface before purchase.

Q: How many clamps are included in the pack?

The pack includes two hose clamps. One clamp secures the 3 inch adapter to the hose, and the second clamp secures the bayonet fitting to the hose. Having both clamps in the kit means you do not need extra hardware for a basic install. Keep a screwdriver or nut driver handy for tightening.