The DRIVE Universal Rubber Mud Flap kit gives you a simple way to cut down spray off the tyres on older small to medium cars and utes. Each flap sits at 330mm high and 210mm wide, so you get decent coverage behind the wheel without hanging too low. The universal pattern works on front or rear, so you can tackle one end of the vehicle with a single pair.

The rubber construction keeps the 330mm height flexible, so it bends away from rocks instead of snapping. A fixed 210mm width suits many factory guards on older gear, making this a smart buy for tidying up an ageing setup. Supplied fittings line up with the moulded shape, so you can bolt the pair on and get out there. This is straightforward mud flap gear built tough for real-world road grime.

• Universal rubber mud flaps for vehicles
• Suits older small to medium cars and utilities
• Suitable for front or rear axle use
• Supplied as one matching pair
• Supplied complete with fittings for mounting
• Each flap height: 330mm
• Each flap width: 210mm
• Constructed from flexible rubber material
• Helps reduce mud, stones and road spray
• Brand: DRIVE

Q: Can these mud flaps be used on the front and rear of the same vehicle?

Yes, they can be used on either front or rear. These universal flaps suit older small to medium cars and utilities at both ends of the vehicle. You can fit the pair to the front axle or the rear axle depending on which needs more protection. If you want full-vehicle coverage you would purchase two pairs.

Q: Do the mud flaps come with the mounting hardware?

Yes, fittings are included. The kit is supplied with fittings so you do not need to source basic hardware separately. This keeps the install straightforward for typical older cars and utes. You may still choose to use existing fasteners if they line up. Always check the hardware length against your guard thickness.

Q: What size wheel arches will the 330mm x 210mm flaps best suit?

They suit smaller to medium wheel arches. Each flap is 330mm high which matches the typical arch depth on compact cars and many lighter utilities. The 210mm width works where the tyre section and guard opening sit close together. If your vehicle has very wide tyres or oversized wheels you may need a larger flap to match the tread width.

Q: Are these mud flaps suitable for use on unsealed roads?

Yes, they are suitable for normal unsealed roads. The rubber construction copes well with stones, loose gravel and mud from formed dirt roads. The flexible panel deflects debris instead of chipping like hard plastics. For regular touring on graded tracks this style of flap offers practical protection. As always, check clearance so the 330mm height does not catch on obstacles.

Suitable for front or rear fitment on older small to medium size cars and utilities.

Supplied fittings are included for installation.

Universal pattern is intended for general applications and may require positioning to suit specific vehicles.