Battery Link Battery Clamps 30 Amp give you a simple way to hook test leads or light accessory cables onto a battery when you are chasing faults or wiring up an amp. The 30 amp rating suits lighter jobs like small fridges or stereos rather than starter loads. With a red and black clamp in the pack, it is straightforward to keep polarity sorted on 12 volt setups. These clamps use solid metal jaws with plastic sleeves over the handles so your grip stays on the gear, not the terminals. The 30 amp capacity lines up well with typical accessory cable sizes used in cars and campers. Spring pressure in the jaws holds onto round posts and lugs without tools, handy when you want to get out there again instead of mucking around in the engine bay.
- Battery Link 30 amp insulated battery clamps
- Pack of 2 clamps supplied
- Includes one red and one black clamp
- Suitable as replacement clamps for amplifier cables
- Rated for light duty 30 amp circuits
- Insulated plastic sleeves on handles
- Metal jaws provide solid electrical contact
- Simple spring clamp design for quick connections
- Ideal for test leads and accessory power setups
- Suits 12 volt and 24 volt low voltage systems
Q: Are these clamps suitable for starter motor jump-start currents?
No, these clamps are rated for 30 amp use. They suit lighter loads like small accessories, test gear, or amplifier cables. Starter motors can draw several hundred amps which exceeds this rating. For cranking use, go for heavy-duty jumper clamps instead.
Q: Do the clamps come with cables attached?
No, this pack only includes two bare clamps. You will need to attach your own suitable cable and terminations. This lets you match cable size and length to your setup. Always use cable rated above 30 amp for best results.
Q: Can I use these clamps on a 24 volt system?
Yes, these clamps can be used on 12 volt or 24 volt systems at up to 30 amp. Voltage is not the main limit here, current is. Keep the load within the 30 amp rating and use correct cable size. Always connect with correct polarity.
Q: Are the clamps insulated on the jaws as well as the handles?
The handles have plastic insulation sleeves while the jaws remain bare metal. The bare jaws give a solid electrical contact on posts and lugs. The insulated grips help keep fingers away from live metal when positioned correctly. Always switch off power before clipping or removing clamps.
- 30 amp clamps for light circuits
- Insulated handles for confident handling
- Red and black pair keeps polarity clear
- Great swap for tired old clamps
- Handy bit of kit for test leads
- Brand: Battery Link
- Product type: battery test clamps
- Continuous current rating: 30 amp
- Insulation: plastic coated handles
- Pack quantity: 2 clamps
- Typical use: replacement clamps for amplifier cables
- 1 x red insulated battery clamp
- 1 x black insulated battery clamp
| SKU | 872 |
|---|---|
| Barcode # | 9311902774083 |
| Brand | Battery Link |
| Shipping Weight | 2.5000kg |
More infoMake 4 payments of $1.25 over 8 weeks and get it now!
Calculate Shipping
Battery Link Battery Clamps 30 Amp give you a simple way to hook test leads or light accessory cables onto a battery when you are chasing faults or wiring up an amp. The 30 amp rating suits lighter jobs like small fridges or stereos rather than starter loads. With a red and black clamp in the pack, it is straightforward to keep polarity sorted on 12 volt setups. These clamps use solid metal jaws with plastic sleeves over the handles so your grip stays on the gear, not the terminals. The 30 amp capacity lines up well with typical accessory cable sizes used in cars and campers. Spring pressure in the jaws holds onto round posts and lugs without tools, handy when you want to get out there again instead of mucking around in the engine bay.
- Battery Link 30 amp insulated battery clamps
- Pack of 2 clamps supplied
- Includes one red and one black clamp
- Suitable as replacement clamps for amplifier cables
- Rated for light duty 30 amp circuits
- Insulated plastic sleeves on handles
- Metal jaws provide solid electrical contact
- Simple spring clamp design for quick connections
- Ideal for test leads and accessory power setups
- Suits 12 volt and 24 volt low voltage systems
Q: Are these clamps suitable for starter motor jump-start currents?
No, these clamps are rated for 30 amp use. They suit lighter loads like small accessories, test gear, or amplifier cables. Starter motors can draw several hundred amps which exceeds this rating. For cranking use, go for heavy-duty jumper clamps instead.
Q: Do the clamps come with cables attached?
No, this pack only includes two bare clamps. You will need to attach your own suitable cable and terminations. This lets you match cable size and length to your setup. Always use cable rated above 30 amp for best results.
Q: Can I use these clamps on a 24 volt system?
Yes, these clamps can be used on 12 volt or 24 volt systems at up to 30 amp. Voltage is not the main limit here, current is. Keep the load within the 30 amp rating and use correct cable size. Always connect with correct polarity.
Q: Are the clamps insulated on the jaws as well as the handles?
The handles have plastic insulation sleeves while the jaws remain bare metal. The bare jaws give a solid electrical contact on posts and lugs. The insulated grips help keep fingers away from live metal when positioned correctly. Always switch off power before clipping or removing clamps.
- 30 amp clamps for light circuits
- Insulated handles for confident handling
- Red and black pair keeps polarity clear
- Great swap for tired old clamps
- Handy bit of kit for test leads
- Brand: Battery Link
- Product type: battery test clamps
- Continuous current rating: 30 amp
- Insulation: plastic coated handles
- Pack quantity: 2 clamps
- Typical use: replacement clamps for amplifier cables
- 1 x red insulated battery clamp
- 1 x black insulated battery clamp
| SKU | 872 |
|---|---|
| Barcode # | 9311902774083 |
| Brand | Battery Link |
| Shipping Weight | 2.5000kg |
