The MAKO Fitted Coil Water Hose at 10 m long and 12 mm internal diameter is handy when you want a simple link from tap to van. The hose handles the usual mains pressure feed for topping up tanks or running a 1/2" style inlet on your caravan. The quick connect fittings mean you can get out there and set the gear between tap and water tank without juggling loose clamps.

This white food grade hose runs a full 10 m length so you have room to park a bit off the tap and still reach. The hose material is listed as Hose with a smooth internal bore at 12 mm to keep flow up for showers and sinks. The coil style keeps the kit tidy in a hatch or tub. The non taint spec suits long days in Aussie heat without that plastic taste taking over.

• MAKO fitted coil water hose for caravans and RVs

• Total hose length of 10 m for tap to tank runs

• Internal diameter specified as 12 mm (approx 1/2")

• Food grade hose material to avoid tainting water

• Supplied in white colour to match typical caravan plumbing

• Includes quick connect fittings for compatible tap hardware

• Suitable for filling water tanks from mains pressure supplies

• Coil format allows compact storage in lockers or tubs

• Listed material type as Hose in manufacturer specifics

• Ideal for fresh water use across camping and touring setups

Q: Can this hose stay connected to mains pressure for extended periods?

Yes, it is intended for use on mains pressure connections. The hose is described for filling water tanks or attaching to mains pressure, so leaving it connected at a powered site is within its typical use. As with any caravan water setup, check your connections for leaks. Disconnect and drain the hose before storage to keep the coil tidy and the fittings in good condition.

Q: Does the hose come with quick connect fittings already installed?

Yes, quick connect fittings are included on the hose. The description specifies quick connect fittings, so they come as part of the hose setup. That means you do not need to buy separate fittings to start using it on compatible taps. Always confirm the tap end style at your usual parks to make sure it matches your existing hardware.

Q: Is this hose suitable for filling portable water containers as well as fixed tanks?

Yes, it can be used to fill portable containers. The hose is described for filling a water tank or attaching to mains pressure, which covers fixed tanks and loose jerry-style containers placed near the tap. The 10 m length helps you reach containers on the drawbar or in the shade. Keep the hose ends off the ground to avoid dirt entering your containers.

Q: What diameter fittings will this hose suit?

This hose suits fittings sized around 12 mm or 1/2". The listing names a 12 mm food grade hose and a 1/2" fitted coil, so matching those sizes keeps flow and sealing correct. Using the right size avoids restriction or leaks at the joints. If you use adapters, pick ones that transition cleanly from 1/2" to your alternate system without sharp steps.