The Coast to Coast aluminium H frame gives your Sparrow A/C a solid base over a roof cut out of 360 mm by 360 mm, so the unit sits square on a pop top. The frame runs 2410 mm long and 750 mm wide, so the load spreads past the opening instead of hanging on thin sheet. The 25 mm depth keeps things low while still bracing the roof around the air conditioner. The aluminium construction keeps weight down across that 2410 mm span, which helps when you are watching caravan payload. The metal also holds up well around salty air and wet seasons, better than bare steel in the same spot. The fixed 360 mm by 360 mm inner opening lines up with Sparrow specs, so the cut matches the gear you are bolting down. Overall it is a smart buy when you want the A/C supported without overcomplicating the roof frame.

• Aluminium H-frame support for Aircommand Sparrow A/C
• Intended for use on pop-top caravan or RV roofs
• Cut-out opening sized at 360 mm x 360 mm
• Overall H-frame size 2410 mm L x 750 mm W x 25 mm D
• Lightweight aluminium helps manage caravan roof payload
• Long rails spread air conditioner load across roof structure
• Low 25 mm profile maintains interior headroom under unit
• Frame layout matches Sparrow mounting zone on typical vans
• Suits installations where extra roof reinforcement is required
• Coast to Coast branded air conditioner support frame

Q: Does this H frame include the Aircommand Sparrow air conditioner?

No, this H frame is supplied on its own as a support frame. You use it with a compatible Aircommand Sparrow A/C unit purchased separately. The frame provides the structural base around the 360 mm by 360 mm roof opening. The air conditioner then mounts into that opening during installation.

Q: What roof opening size does this frame suit?

The frame suits a roof cut out of 360 mm by 360 mm. This matches the opening required for an Aircommand Sparrow unit. The H frame surrounds that opening with extra support. Always check the cut size on your specific A/C before cutting the roof.

Q: Is this frame suitable for pop-top caravans only?

The frame is described for use on pop-top roofs. The 2410 mm by 750 mm footprint is laid out to work with that style of roof and Sparrow A/C positioning. Other roof types may differ in structure, so installers usually select frames built for their roof design.

Q: What material is used for the H frame?

The H frame is made from aluminium. This keeps the long 2410 mm rails lighter than steel alternatives. Aluminium also resists rust in damp or coastal environments. That helps maintain the frame over years of caravanning.

• Suits Aircommand Sparrow air conditioner on pop-top caravans and RVs
• Requires roof cut-out of 360 mm x 360 mm to match Sparrow unit opening
• H-frame footprint is 2410 mm long by 750 mm wide for roof support layout
• Fitment location is the caravan or RV pop-top roof under the Sparrow A/C
• Professional installation recommended to align frame with existing roof structure