The Camec Grab Handle Gasket Vecam steps in when the original backing plate under your door handle starts to crack or flatten out, giving the Vecam grab handle a fresh gasket that matches the 3-hole pattern used on the standard Camec assembly. The grey plastic plate lines up with the existing mounting on most caravan or camper doorways, so you can tackle a simple swap and get out there with a handle that sits straight and feels solid again.
The gasket is moulded from plastic in a low-key grey tone, with a footprint around 80 mm long and 45 mm wide to suit the Vecam style grab handle base. The plate builds a consistent surface between the handle and the body sheet, which matters once cladding thickness drops under 1 mm on many vans. The fit matches Camec grab handle code 007980, making it a smart buy when you want your entry setup sorted for Aussie touring.
- Genuine Camec grab handle gasket
- Suits Vecam grab handle assembly
- Matches Camec handle code 007980
- Made from durable plastic material
- Neutral grey colour for caravan bodies
- Three mounting holes for handle screws
- Rectangular footprint to support handle base
- Ideal replacement when original gasket wears
- Suits caravan and RV door grab handle locations
- Simple way to refresh entry hardware appearance
Q: Is this gasket supplied with a grab handle?
No, this gasket is supplied on its own. This gear is intended as a replacement backing plate when your original gasket wears out. The Vecam grab handle assembly is a separate piece under a different code. Adding this gasket to your order is a smart move if your existing backing plate is cracked or missing.
Q: Which handle does the Camec Grab Handle Gasket Vecam suit?
It suits the Camec Vecam grab handle under code 007980. The gasket is shaped to the footprint and screw pattern used on that specific handle. Matching the handle code before ordering avoids fitment issues on your caravan or camper. If your current handle is stamped or sold as code 007980, this gasket is the correct partner.
Q: Can I use this gasket on other caravan grab handles?
It is made specifically for the Vecam pattern. Other handles may have different base sizes or screw spacing. Using the wrong gasket can leave exposed edges or misaligned fasteners. For a neat setup and proper support, stick with this gasket when you are running the Vecam grab handle and look for brand-matched parts on different hardware.
Q: Where is this gasket usually installed on a caravan?
It normally sits behind the door grab handle on the exterior wall. The gasket is trapped between the handle base and the caravan body. This position helps spread load from the handle into the wall sheet. It also cleans up the interface where the casting meets the cladding. Replacing a flattened or perished gasket keeps the entry handle feeling firm in everyday use.
- Suits Camec Vecam grab handle assembly (refer code 007980)
- Intended for caravan and RV door or body grab handle installations
- Fits between grab handle base and mounting surface to form gasket interface
- Check existing Vecam handle pattern and part code 007980 before purchase
- Direct replacement for tired grab handle gasket
- Sized to suit Vecam handle footprint
- Grey plastic plate made to last
- Three-hole layout keeps hardware aligned
- Handy spare for touring repair kits
- Brand: Camec
- Product type: Grab handle gasket
- Application: Replacement gasket for Vecam grab handle (refer code 007980)
- Material: Plastic
- Colour: Grey
- Category: Caravan and RV grab handles and towel rails hardware
- 1 x Camec Vecam grab handle gasket (grey plastic)
| SKU | 007981-A |
|---|---|
| Barcode # | 007981-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
More infoMake 4 payments of $1.00 over 8 weeks and get it now!
Calculate Shipping
The Camec Grab Handle Gasket Vecam steps in when the original backing plate under your door handle starts to crack or flatten out, giving the Vecam grab handle a fresh gasket that matches the 3-hole pattern used on the standard Camec assembly. The grey plastic plate lines up with the existing mounting on most caravan or camper doorways, so you can tackle a simple swap and get out there with a handle that sits straight and feels solid again.
The gasket is moulded from plastic in a low-key grey tone, with a footprint around 80 mm long and 45 mm wide to suit the Vecam style grab handle base. The plate builds a consistent surface between the handle and the body sheet, which matters once cladding thickness drops under 1 mm on many vans. The fit matches Camec grab handle code 007980, making it a smart buy when you want your entry setup sorted for Aussie touring.
- Genuine Camec grab handle gasket
- Suits Vecam grab handle assembly
- Matches Camec handle code 007980
- Made from durable plastic material
- Neutral grey colour for caravan bodies
- Three mounting holes for handle screws
- Rectangular footprint to support handle base
- Ideal replacement when original gasket wears
- Suits caravan and RV door grab handle locations
- Simple way to refresh entry hardware appearance
Q: Is this gasket supplied with a grab handle?
No, this gasket is supplied on its own. This gear is intended as a replacement backing plate when your original gasket wears out. The Vecam grab handle assembly is a separate piece under a different code. Adding this gasket to your order is a smart move if your existing backing plate is cracked or missing.
Q: Which handle does the Camec Grab Handle Gasket Vecam suit?
It suits the Camec Vecam grab handle under code 007980. The gasket is shaped to the footprint and screw pattern used on that specific handle. Matching the handle code before ordering avoids fitment issues on your caravan or camper. If your current handle is stamped or sold as code 007980, this gasket is the correct partner.
Q: Can I use this gasket on other caravan grab handles?
It is made specifically for the Vecam pattern. Other handles may have different base sizes or screw spacing. Using the wrong gasket can leave exposed edges or misaligned fasteners. For a neat setup and proper support, stick with this gasket when you are running the Vecam grab handle and look for brand-matched parts on different hardware.
Q: Where is this gasket usually installed on a caravan?
It normally sits behind the door grab handle on the exterior wall. The gasket is trapped between the handle base and the caravan body. This position helps spread load from the handle into the wall sheet. It also cleans up the interface where the casting meets the cladding. Replacing a flattened or perished gasket keeps the entry handle feeling firm in everyday use.
- Suits Camec Vecam grab handle assembly (refer code 007980)
- Intended for caravan and RV door or body grab handle installations
- Fits between grab handle base and mounting surface to form gasket interface
- Check existing Vecam handle pattern and part code 007980 before purchase
- Direct replacement for tired grab handle gasket
- Sized to suit Vecam handle footprint
- Grey plastic plate made to last
- Three-hole layout keeps hardware aligned
- Handy spare for touring repair kits
- Brand: Camec
- Product type: Grab handle gasket
- Application: Replacement gasket for Vecam grab handle (refer code 007980)
- Material: Plastic
- Colour: Grey
- Category: Caravan and RV grab handles and towel rails hardware
- 1 x Camec Vecam grab handle gasket (grey plastic)
| SKU | 007981-A |
|---|---|
| Barcode # | 007981-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
