Standard brass adaptor for the two tap sizes in Australia. Use this part to connect your Flat Out hose to taps at your water supply.
Don’t leave it behind! This is one of the most commonly ‘lost’ items when traveling. We believe it’s because when you’re at home you become so comfortable with clicking a hose off a tap leaving this piece in place, that when you travel the same habit kicks in.
The 12mm (1/2 inch) male click-on end is compatible with all Flat Out drink water hose brass ends and female fittings from other brands.
The 19mm (¾ inch) & 25mm (1 inch) BSP threaded female side fits on to taps without thread tape as the inner rubber washers create the seal.
**If this item develops leaks in time, you can purchase replacement rubber o-rings and /or washers at your local hardware store.
- Solid brass adaptor for Aussie taps
- Handles 3/4" and 1" BSP outlets
- Links 12mm hose to site taps
- Rubber washers give reliable seal
- Smart buy to keep in hose kit
- Material: brass construction
- Connection type (hose side): 12mm (1/2 inch) male click-on
- Tap thread sizes: 19mm (3/4 inch) BSP female
- Additional tap thread size: 25mm (1 inch) BSP female
- Seal type: inner rubber washers
- Compatible with: Flat Out drink water hose brass ends
- Cross-compatibility: fits many 12mm female hose fittings from other brands
- Replaceable parts: accepts standard rubber O-rings and washers
1 x Flat Out snap-on brass tap adaptor with 3/4" and 1" BSP threaded female ends and 12mm (1/2") male click-on hose connection
| SKU | P4 |
|---|---|
| Barcode # | 9309000395279 |
| Brand | Flat Out |
| Shipping Weight | 0.1000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.030m |
| Shipping Length | 0.150m |
More infoMake 4 payments of $4.12 over 8 weeks and get it now!
Calculate Shipping
Standard brass adaptor for the two tap sizes in Australia. Use this part to connect your Flat Out hose to taps at your water supply.
Don’t leave it behind! This is one of the most commonly ‘lost’ items when traveling. We believe it’s because when you’re at home you become so comfortable with clicking a hose off a tap leaving this piece in place, that when you travel the same habit kicks in.
The 12mm (1/2 inch) male click-on end is compatible with all Flat Out drink water hose brass ends and female fittings from other brands.
The 19mm (¾ inch) & 25mm (1 inch) BSP threaded female side fits on to taps without thread tape as the inner rubber washers create the seal.
**If this item develops leaks in time, you can purchase replacement rubber o-rings and /or washers at your local hardware store.
- Solid brass adaptor for Aussie taps
- Handles 3/4" and 1" BSP outlets
- Links 12mm hose to site taps
- Rubber washers give reliable seal
- Smart buy to keep in hose kit
- Material: brass construction
- Connection type (hose side): 12mm (1/2 inch) male click-on
- Tap thread sizes: 19mm (3/4 inch) BSP female
- Additional tap thread size: 25mm (1 inch) BSP female
- Seal type: inner rubber washers
- Compatible with: Flat Out drink water hose brass ends
- Cross-compatibility: fits many 12mm female hose fittings from other brands
- Replaceable parts: accepts standard rubber O-rings and washers
1 x Flat Out snap-on brass tap adaptor with 3/4" and 1" BSP threaded female ends and 12mm (1/2") male click-on hose connection
| SKU | P4 |
|---|---|
| Barcode # | 9309000395279 |
| Brand | Flat Out |
| Shipping Weight | 0.1000kg |
| Shipping Width | 0.100m |
| Shipping Height | 0.030m |
| Shipping Length | 0.150m |
