The Camec Drop Nose Pin is simple caravan gear that keeps a raiser arm roof clamp held in place so the arm does not wander on corrugations or when you tackle a long highway run. The L shaped pin drops through aligned holes and the wire loop locks over the shaft so you can see at a glance if the setup is secured before you roll out.
The steel construction stands up to normal towing loads on caravan and RV hardware and handles the usual mix of dust and moisture you see from the bush to the beach. The compact length sits neatly around your clamp gear so it does not foul tools or other equipment when you load up. If you want straightforward hardware for clamp locking this pin is a smart buy that just does the job.
- Genuine Camec drop nose pin spare
- Simple mechanical lock for raiser arm roof clamps
- Suits caravan and RV towing and clamp setups
- L shaped pin passes through aligned bracket holes
- Wire loop retainer stops the pin backing out
- Compact length keeps clear of bodywork and cabling
- Smooth shaft helps reduce wear on clamp holes
- Handy backup pin to keep in the caravan toolbox
- No tools required for normal fitting or removal
- Ideal for straightforward visual lock checks before towing
Q: Is the Camec Drop Nose Pin reusable or single-use?
The Camec Drop Nose Pin is reusable. The solid metal construction lets you remove and refit it as you adjust or service your clamp setup. Just check the pin and loop for any bending or heavy wear over time. Replace it if you see obvious damage so your clamp stays secure on the road.
Q: Can I use this pin as a general spare on my caravan?
Yes, it can act as a general-purpose spare drop nose pin where the size matches your existing brackets. Many caravan and RV clamps use similar style pins for quick locking. Keep it in your toolbox so you have backup hardware on longer trips. Always make sure the diameter and length suit the hole and clearance on your specific gear.
Q: Do I need tools to fit or remove this drop nose pin?
No, normal use of the pin does not require tools. You line up the clamp holes, slide the pin through, and flip the wire loop over the shaft. To remove it, you lift the loop and pull the pin back out. This keeps setup changes quick at camp or in the driveway.
Q: Is this pin suitable for outdoor storage on the drawbar?
The pin is intended for use in exposed caravan and RV positions. It can stay fitted to clamps that live on the drawbar or roof hardware. Still, it is good practice to rinse off road grime and grit now and then. A light wipe before storage helps keep the pin moving freely through the clamp holes.
- Suitable for securing raiser arm roof clamp on compatible caravan and RV setups
- Used as a locking device within towing and weight distribution assemblies
- Fitment depends on existing bracket or clamp dimensions and design
- Check your current clamp or arm uses a drop nose style pin before purchase
- Straight-up locking pin for clamps
- Solid metal gear for towing setups
- Compact design for crowded drawbars
- Smart buy as a backup spare
- Brand: Camec
- Product type: Drop nose pin
- Primary use: Securing raiser arm roof clamp
- Applications: General caravan and RV towing setups
- Category: Towing kits and weight distribution spare part
- 1 x Camec Drop Nose Pin
| SKU | 008289-A |
|---|---|
| Barcode # | 008289-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
More info
The Camec Drop Nose Pin is simple caravan gear that keeps a raiser arm roof clamp held in place so the arm does not wander on corrugations or when you tackle a long highway run. The L shaped pin drops through aligned holes and the wire loop locks over the shaft so you can see at a glance if the setup is secured before you roll out.
The steel construction stands up to normal towing loads on caravan and RV hardware and handles the usual mix of dust and moisture you see from the bush to the beach. The compact length sits neatly around your clamp gear so it does not foul tools or other equipment when you load up. If you want straightforward hardware for clamp locking this pin is a smart buy that just does the job.
- Genuine Camec drop nose pin spare
- Simple mechanical lock for raiser arm roof clamps
- Suits caravan and RV towing and clamp setups
- L shaped pin passes through aligned bracket holes
- Wire loop retainer stops the pin backing out
- Compact length keeps clear of bodywork and cabling
- Smooth shaft helps reduce wear on clamp holes
- Handy backup pin to keep in the caravan toolbox
- No tools required for normal fitting or removal
- Ideal for straightforward visual lock checks before towing
Q: Is the Camec Drop Nose Pin reusable or single-use?
The Camec Drop Nose Pin is reusable. The solid metal construction lets you remove and refit it as you adjust or service your clamp setup. Just check the pin and loop for any bending or heavy wear over time. Replace it if you see obvious damage so your clamp stays secure on the road.
Q: Can I use this pin as a general spare on my caravan?
Yes, it can act as a general-purpose spare drop nose pin where the size matches your existing brackets. Many caravan and RV clamps use similar style pins for quick locking. Keep it in your toolbox so you have backup hardware on longer trips. Always make sure the diameter and length suit the hole and clearance on your specific gear.
Q: Do I need tools to fit or remove this drop nose pin?
No, normal use of the pin does not require tools. You line up the clamp holes, slide the pin through, and flip the wire loop over the shaft. To remove it, you lift the loop and pull the pin back out. This keeps setup changes quick at camp or in the driveway.
Q: Is this pin suitable for outdoor storage on the drawbar?
The pin is intended for use in exposed caravan and RV positions. It can stay fitted to clamps that live on the drawbar or roof hardware. Still, it is good practice to rinse off road grime and grit now and then. A light wipe before storage helps keep the pin moving freely through the clamp holes.
- Suitable for securing raiser arm roof clamp on compatible caravan and RV setups
- Used as a locking device within towing and weight distribution assemblies
- Fitment depends on existing bracket or clamp dimensions and design
- Check your current clamp or arm uses a drop nose style pin before purchase
- Straight-up locking pin for clamps
- Solid metal gear for towing setups
- Compact design for crowded drawbars
- Smart buy as a backup spare
- Brand: Camec
- Product type: Drop nose pin
- Primary use: Securing raiser arm roof clamp
- Applications: General caravan and RV towing setups
- Category: Towing kits and weight distribution spare part
- 1 x Camec Drop Nose Pin
| SKU | 008289-A |
|---|---|
| Barcode # | 008289-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
