The Clipsal Flap To Suit New Style Power Outlet White 415VF steps in when the original cover cracks or goes missing on a 240 volt hookup. The cover face sits at 80 mm by 100 mm so it lines up with the standard new style Clipsal outlet front. The setup needs at least 40 mm of depth in the wall or mounting box so the outlet body and flap can sit properly without fouling wiring. This bit of gear runs the same hinge style and latch layout used across the Clipsal new style range so you know it will sit square once clipped on. The hard white shell spans the full 80 mm by 100 mm opening and gives solid protection to the outlet face in open sites from the caravan park to the backyard. The size and depth spec match common 240 volt install hardware which makes it a smart buy for straightforward swaps.

• Genuine Clipsal replacement flap for new style outlet
• Suits 240V power outlet installations
• Flap only, outlet and socket not included
• White finish to match standard Clipsal hardware
• Front cover dimensions 80 mm x 100 mm
• Requires minimum 40 mm mounting depth behind outlet
• Hinged design to cover and uncover outlet face
• Suitable for caravan, RV and outdoor power points
• Simple physical swap for cracked or missing covers

Q: Does this flap include the full power outlet or just the cover?

This listing is for the flap only. The gear replaces a damaged or missing cover on an existing Clipsal new style outlet. The backing plate, socket and wiring stay as they are. A licensed electrician should handle any work on 240 volt circuits.

Q: What size opening does this Clipsal flap actually cover?

The flap face measures 80 mm by 100 mm. This size lines up with the front of the Clipsal new style outlet frame. Measuring the existing hardware before ordering helps confirm the match. The size spec also helps when planning clearances around other fittings.

Q: How much clearance do I need behind the outlet for this flap to work?

The outlet position needs at least 40 mm depth. This clearance lets the outlet body and hinge sit without crushing cable or fouling the wall. Checking box depth on caravan or shed panels helps avoid fitment issues. Deeper boxes still work as long as screw positions suit the outlet.

Q: Is this flap suitable for use on a caravan external 240V inlet point?

The flap suits Clipsal new style power outlets which are commonly used on caravan and RV hookups. As long as the existing fitting is a Clipsal new style unit with an 80 mm by 100 mm face and 40 mm depth, this cover will match. Any connection to mains power should follow local electrical regulations.

This flap suits the Clipsal new style power outlet only. The outlet location requires at least 40 mm depth in the mounting surface to accommodate the body. Check that the existing outlet plate footprint matches 80 mm x 100 mm before replacement. Installation should be carried out by a licensed electrician when connected to 240 V mains circuits.