This Camec 3P Door Outer Handle Kit steps straight into a standard Camec three point door lock, so you can get out there without fighting a loose or broken handle on a 30–40 mm thick caravan door. The supplied spindle lines up with the existing square drive in the lock body, keeping the original three latch points throwing their full multi-millimetre stroke so the door pulls up firm against the frame every time you shut it.

The kit brings a matched handle, spindle and torsion spring, so all the moving parts work together rather than stressing a single plastic lug over a few thousand cycles and hundreds of kilometres of towing. You reuse your original fixing screw through the outer skin, which keeps the handle tight into the Camec casting and avoids chewing out a fresh hole in a thin aluminium or composite door sheet measuring only a few millimetres thick.

• Suits Camec 3 point main door locks
• Replaces damaged or worn outer handle
• Includes matching spindle for correct engagement
• Includes torsion spring for handle return
• Compatible with existing Camec 3P lock body
• Screw specifically not included in kit
• Ideal for caravan and RV entry doors
• Lets you retain existing internal lock hardware
• Straightforward swap using basic hand tools
• Helps restore smooth door latching operation

Q: Does this kit include the mounting screw?

No, the mounting screw is not included. You reuse the existing screw from your current Camec 3P outer handle. That screw is already the right length for your specific door thickness. Using the original fastener also helps keep the existing hole in good shape. Check the condition of the old screw when you swap the handle.

Q: Will this fit any caravan door lock?

No, it only suits Camec 3 point door locks. The handle and spindle are shaped for the Camec 3P mechanism. Other brands and single-point locks use different spindle sizes and angles. If your door hardware does not show Camec branding or a three point latch setup, this kit is unlikely to match. Compare your old handle to the product photos before ordering.

Q: Is the internal lock body included in this kit?

No, the internal lock body is not included. This kit is only for the outer handle, spindle and torsion spring. The existing internal mechanism stays in the door. If your lock is jamming even with the handle removed, you may need a full lock assembly instead. Use this kit when the handle or return spring is the main issue.

Q: Can I install this handle kit myself?

Most owners can swap this kit with basic hand tools. The outer handle is held by the single mounting screw and the spindle locates into the lock body. Removing the old handle and swapping the parts is straightforward for most DIY users. Take note of spring orientation before removal so you can refit the new one in the same way. Work with the door open so the latch cannot catch unexpectedly.

Suits Camec 3 point door locks used on Camec 3P caravan and RV doors. Intended for the main entry door outer handle position. Check that your existing lock is a Camec 3 point style before ordering. Reuse the existing mounting screw from your current handle as a new screw is not supplied.