This Camec rotating mini door lock with short thread suits access doors and small hatches on vans and RVs. The threaded cylinder drops into a simple round cut-out so you can swap out worn locks on older gear without extra drilling. The cam rotation gives a clear on-or-off latch position so you know when the hatch is actually closed before you hit the highway. The short thread barrel pairs well with thin sheet metal or lightweight door skins where a long lock would stick out and snag gear. The metal body and cam handle constant vibration and dust from corrugated roads across Australia. The compact head lets this kit tuck in near frames and trim without crowding other fittings. For anyone freshening up caravan access doors this is a smart buy that keeps the setup straightforward.

• Camec rotating mini door lock assembly
• Short thread barrel suits thin doors
• Threaded cylinder lock for access hatches
• Commonly used on caravan and RV access doors
• Compact cam action latch for small panels
• Metal construction suited to touring conditions
• Simple through-hole mounting with retaining nut
• Ideal replacement for worn cylinder hatch locks
• Suits storage, boot and service doors

Q: Is this lock suitable for exterior caravan access doors?

Yes, this lock is commonly used on exterior access doors. The threaded cylinder design works well in thin sheet metal panels like service hatches and small boot doors. The rotating cam pulls the door against the frame to limit rattles. For best results match the short thread length to door thickness so the nut clamps firmly.

Q: Can I use this lock on an internal cupboard or wardrobe door?

Yes, you can use it on thin internal doors that accept a cylinder hole. The short thread suits lightweight panels such as cupboard doors in many vans. The compact cam lets the door close without needing extra catches. Just make sure the cam can rotate behind the frame without hitting shelves or dividers.

Q: Does this lock require a special cut-out shape in the door?

No, it generally suits a simple round hole cut-out. The threaded barrel passes through the circular hole and the nut tightens from the back. This keeps install straightforward when replacing older cylinder locks. Always measure the existing hole to confirm it matches the new lock body diameter.

Q: Is this lock suitable as the main entry door lock on a caravan?

No, this style is better for secondary access doors and hatches. Main entry doors usually need multi-point or deadbolt-style locks for extra security. This mini lock suits meter doors, storage hatches and small panels. Use it where you need basic access control rather than full main-door security.