The Camec Back Catch Large keeps cupboard doors shut so your gear stays put when you get out there on corrugated tracks or long highway runs. The catch mounts behind a rosette and knob on the door and bites onto a separate striker so the door stays closed when the van flexes. You can pair it with the Camec angle striker under code 008103 for frames that do not line up straight. This catch runs a large backing plate and central spindle so the load spreads across the cupboard panel instead of chewing out one small spot. The setup suits caravan and RV cabinetry where panels are thin and sit under constant movement. Each catch is sold on its own so you only swap what is worn out. That makes it a smart buy when you are tidying up older doors before the next trip.

• Camec large format back catch for cupboards
• Suits caravan and RV door and cupboard use
• Used in conjunction with separate rosette and knob
• Compatible with optional angle striker code 008103
• Each catch component supplied and sold individually
• Cupboard catch style latch for internal storage doors
• Large backing body helps spread load on thin panels
• Ideal for replacing worn or broken existing catches
• Works as part of a full Camec latch setup
• Simple mechanical design for straightforward replacement

Q: Is the rosette and knob included with the Camec Back Catch Large?

No, the rosette and knob are sold separately. The back catch is just the internal latching body that sits behind the door panel. You pair it with a matching rosette and knob to complete the latch. This setup lets you replace only the worn component instead of changing the whole door kit. Check your existing hardware to match style and shaft size.

Q: Do I have to use the angle striker code 008103 with this catch?

No, the angle striker is optional. The catch will work with a standard compatible striker where the door and frame line up in the same plane. The angle striker comes in when the frame surface is offset from the door face. Using the right striker keeps the latch engagement square and reduces wear over time.

Q: How many doors will one Camec Back Catch Large fit?

One catch is intended for one door. Each unit is supplied individually so you match the quantity to the number of cupboard doors you plan to repair. If you are doing a whole van, count the doors and order that many catches. Remember you may also need the same count of rosettes, knobs and striker plates.

Q: Can I use this catch on non-caravan cupboards at home?

It can be used where the matching hardware fits. The catch is designed around caravan style rosettes, knobs and striker plates. If you have those components and a similar door thickness it can operate on other cupboards. Just make sure you can mount the striker and that the knob spindle lines up cleanly through the panel.

Back catch is used in conjunction with a separate rosette and knob on cupboard doors or similar panels. An optional angle striker (code 008103) may be required where the mating surface is offset. Each component in the latch setup is sold separately so match quantities across catch, rosette, knob and striker as needed.