The Camec Adjustable Pressure Reducing Valve EB35 steps high supply pressure down to a manageable 110–550 kPa range so your caravan hot water gear does not cop a hiding. You screw this valve straight into a run of 1/2in BSP pipe and dial in the outlet to match the Henry hot water service listed as code 038545. That means fewer shocks through your heater when park pressure climbs over 300 kPa.
The brass body with DN15 ports lines up with standard 1/2in caravan plumbing and keeps flow steady under typical campsite pressures. The adjustment head on top lets you tweak between 110 kPa and 550 kPa using normal hand tools so you can set it once and get out there. The compact casting fits tight lockers where space is under 150 mm deep around the heater connections.
- Adjustable outlet pressure range from 110–550 kPa
- Recommended for Henry hot water service code 038545
- EB35 model pressure reducing valve for caravans and RVs
- 1/2in female BSP threaded connections on both ports
- Helps protect hot water systems from high inlet pressure
- Brass valve body suitable for DN15 pipework
- Compact form suits tight caravan service compartments
- Matches common Australian caravan plumbing fittings
- Simple top adjustment for tuning outlet pressure
- Suitable for use in caravan and RV hot water installations
Q: What size plumbing does this Camec pressure reducing valve suit?
It suits 1/2in BSP plumbing. The valve has 1/2in female BSP threads on both ports so it pairs with standard caravan hose tails and fittings. Most caravan hot water systems already run 1/2in lines so this valve can usually drop into the existing run. Just match it with 1/2in BSP male fittings and suitable thread sealant.
Q: What pressure range can I set with this valve?
The outlet pressure can be set between 110 and 550 kPa. That range covers typical requirements for caravan and RV hot water services. You adjust the setting via the top head to match what your heater manual calls for. Staying inside that band helps protect plumbing and fixtures from overpressure.
Q: Is this valve suitable for a Henry hot water service?
Yes it is recommended for Henry hot water services with reference code 038545. The pressure range and 1/2in BSP connections match the needs of that unit. Fitting the valve before the heater helps keep inlet pressure under control. Always confirm the target pressure against the heater documentation.
Q: Where in the water line should this valve be installed?
It should be installed on the supply line feeding the hot water service. Placing it upstream of the heater lets the valve reduce incoming mains or park pressure before it reaches sensitive components. Keeping it close to the heater keeps pressure stable at the inlet. Use accessible pipework so you can adjust and service the valve later.
- Suitable for use with Henry hot water service code 038545
- Connection size is 1/2in female BSP on inlet and outlet
- Install in line on the water supply feeding the hot water service
- Set outlet pressure within the adjustable 110–550 kPa range using the top adjuster
- Ensure matching 1/2in BSP male fittings and compatible plumbing seals are used
- Installation should follow caravan or RV plumbing standards
- Adjustable pressure for different setups
- 1/2in BSP threads match caravan lines
- Brass construction goes the distance
- Pairs neatly with Henry heaters
- Compact gear for small service spaces
- Brand: Camec
- Model: EB35 adjustable pressure reducing valve
- Connection type: 1/2in female BSP
- Pressure range: 110–550 kPa adjustable
- Recommended use: Henry hot water service (code 038545)
- Application: Caravan and RV hot water systems
- Product type: Pressure reducing valve
- Category: Caravan & RV appliances – heaters and hot water systems
- 1 x Camec EB35 adjustable pressure reducing valve with 1/2in female BSP connections
| SKU | 039245-A |
|---|---|
| Barcode # | 039245-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
Camec Adjustable Pressure Reducing Valve
More infoMake 4 payments of $36.12 over 8 weeks and get it now!
Calculate Shipping
The Camec Adjustable Pressure Reducing Valve EB35 steps high supply pressure down to a manageable 110–550 kPa range so your caravan hot water gear does not cop a hiding. You screw this valve straight into a run of 1/2in BSP pipe and dial in the outlet to match the Henry hot water service listed as code 038545. That means fewer shocks through your heater when park pressure climbs over 300 kPa.
The brass body with DN15 ports lines up with standard 1/2in caravan plumbing and keeps flow steady under typical campsite pressures. The adjustment head on top lets you tweak between 110 kPa and 550 kPa using normal hand tools so you can set it once and get out there. The compact casting fits tight lockers where space is under 150 mm deep around the heater connections.
- Adjustable outlet pressure range from 110–550 kPa
- Recommended for Henry hot water service code 038545
- EB35 model pressure reducing valve for caravans and RVs
- 1/2in female BSP threaded connections on both ports
- Helps protect hot water systems from high inlet pressure
- Brass valve body suitable for DN15 pipework
- Compact form suits tight caravan service compartments
- Matches common Australian caravan plumbing fittings
- Simple top adjustment for tuning outlet pressure
- Suitable for use in caravan and RV hot water installations
Q: What size plumbing does this Camec pressure reducing valve suit?
It suits 1/2in BSP plumbing. The valve has 1/2in female BSP threads on both ports so it pairs with standard caravan hose tails and fittings. Most caravan hot water systems already run 1/2in lines so this valve can usually drop into the existing run. Just match it with 1/2in BSP male fittings and suitable thread sealant.
Q: What pressure range can I set with this valve?
The outlet pressure can be set between 110 and 550 kPa. That range covers typical requirements for caravan and RV hot water services. You adjust the setting via the top head to match what your heater manual calls for. Staying inside that band helps protect plumbing and fixtures from overpressure.
Q: Is this valve suitable for a Henry hot water service?
Yes it is recommended for Henry hot water services with reference code 038545. The pressure range and 1/2in BSP connections match the needs of that unit. Fitting the valve before the heater helps keep inlet pressure under control. Always confirm the target pressure against the heater documentation.
Q: Where in the water line should this valve be installed?
It should be installed on the supply line feeding the hot water service. Placing it upstream of the heater lets the valve reduce incoming mains or park pressure before it reaches sensitive components. Keeping it close to the heater keeps pressure stable at the inlet. Use accessible pipework so you can adjust and service the valve later.
- Suitable for use with Henry hot water service code 038545
- Connection size is 1/2in female BSP on inlet and outlet
- Install in line on the water supply feeding the hot water service
- Set outlet pressure within the adjustable 110–550 kPa range using the top adjuster
- Ensure matching 1/2in BSP male fittings and compatible plumbing seals are used
- Installation should follow caravan or RV plumbing standards
- Adjustable pressure for different setups
- 1/2in BSP threads match caravan lines
- Brass construction goes the distance
- Pairs neatly with Henry heaters
- Compact gear for small service spaces
- Brand: Camec
- Model: EB35 adjustable pressure reducing valve
- Connection type: 1/2in female BSP
- Pressure range: 110–550 kPa adjustable
- Recommended use: Henry hot water service (code 038545)
- Application: Caravan and RV hot water systems
- Product type: Pressure reducing valve
- Category: Caravan & RV appliances – heaters and hot water systems
- 1 x Camec EB35 adjustable pressure reducing valve with 1/2in female BSP connections
| SKU | 039245-A |
|---|---|
| Barcode # | 039245-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
