The Camec Adapter 12mm x 1/2" Male BSP Continuous (DM) hooks a 12mm push-on hose setup into a 1/2 inch BSP threaded line so your caravan plumbing stays simple. The plastic stem suits standard 12mm hose connectors that most touring rigs already run. The O-ring on the 1/2 inch thread helps tighten up the seal so you waste less water when you get out there for a trip. The black plastic body keeps weight down on the van while still handling normal freshwater pressures around 500–600 kPa. The 1/2 inch BSP thread lines up with common taps, pumps, and fittings on Aussie caravans which makes this adaptor a smart buy when you are tidying old plumbing. The compact size under 40 mm long fits into tight cupboards and pump bays so your gear stays out of the way but ready to tackle another weekend.

• Plastic stem adaptor for 12mm connectors
• Connects 12mm push-on hose to 1/2" male BSP
• Includes O-ring for sealing at thread
• Suits caravan and RV plumbing systems
• Made from lightweight black plastic
• Compatible with standard 1/2" BSP fittings
• Compact design ideal for tight spaces
• Helps transition between hose and fixed pipe
• Suitable for freshwater plumbing layouts
• Simple spare to keep in the plumbing kit

Q: Is this adaptor suitable for standard 12mm caravan hose systems?

Yes, this adaptor suits standard 12mm push-on caravan hose connectors. The stem is sized for the common 12mm fittings used in many RV water systems. That means you can slot it straight into an existing 12mm line. It keeps the changeover to 1/2" BSP neat without extra reducers or bulky joints.

Q: Does the adaptor come with a sealing O-ring?

Yes, the adaptor includes an O-ring. The O-ring sits on the 1/2" BSP side to help seal against the mating female fitting. This reduces the chance of drips at the threaded joint. It also means you do not need to source a separate seal for basic installs.

Q: What applications is this adaptor typically used for in a van?

This adaptor is commonly used where a 12mm hose run meets a 1/2" BSP threaded fitting. That can include pump outlets, tap connections, or fixed pipework in caravan plumbing. The compact design is handy behind sinks and in pump bays. It keeps the setup tidy while still allowing future disconnection if needed.

Q: What is the material and colour of the adaptor?

The adaptor is made from black plastic. The plastic construction helps resist corrosion in damp lockers and under-van areas. The black finish matches most existing RV plumbing fittings. The lightweight material also keeps overall vehicle weight and nose load down compared with brass fittings.

• Suits caravan and RV plumbing hose setups using 12mm push-on connectors
• Connects 12mm hose system to 1/2" male BSP threaded fittings
• Install into compatible 1/2" BSP female port then push 12mm connector onto stem
• Suitable for use in hose and pipe runs in caravan plumbing layouts