The Camec Grey Water Fitting Kit 110L hooks up to a universal 110L tank so you can run a proper grey water setup under the van. A 40mm ball valve on 1 1/2" BSP threads lets you hold or dump sink and shower waste at dump points on the highway. A 13mm breather and 15mm cap tidy up spare ports so the tank does its job without drama on corrugated tracks. This kit uses mixed plastic fittings sized to DN40 and DN15 so it lines up with the plumbing already under most Aussie caravans. The 40mm inset adaptor keeps the outlet low and compact which helps when clearance is tight over rocks or gutters. The plastic build shrugs off soaps and detergents and saves weight compared with brass gear so it is a smart buy for keeping grey water sorted from the bush to the beach.
- Suits 110L universal water tanks for grey water use
- Includes 40mm ball valve with 1 1/2" BSP threads
- 40mm inset adaptor matches DN40 tank outlets
- 13mm breather fitting with 1/2" BSP thread
- 15mm cap suits 1/2" BSP DN15 ports
- Mixed plastic construction for low weight plumbing
- Kit completes outlet and vent fittings on grey tanks
- Compatible with common Australian caravan plumbing sizes
- Ideal for sinks and shower grey water lines
- Brand: Camec, caravan and RV specialist
Q: Does this kit include the actual 110L water tank?
No, this kit only includes the fittings. You use it with a separate 110L universal tank already installed or purchased on its own. The gear focuses on outlet control and venting instead of storage volume. Pair it with a compatible tank to complete a full grey water setup.
Q: What hose size suits the breather fitting in this kit?
The breather is sized for 13mm hose. That means standard 13mm caravan breather hose will push over the barb without extra adaptors. A good breather run helps the 110L tank drain properly. It also reduces smell issues by letting gases escape through a designated line.
Q: What thread size is used on the main outlet valve?
The main valve uses 1 1/2" BSP threads. This matches DN40 fittings common on caravan grey water tanks and plumbing. You can connect it to compatible 40mm pipe or hose tails. Always check your existing outlet size before ordering to keep the install straightforward.
Q: Is the kit suitable for fresh water use as well as grey water?
The kit is supplied as a grey water fitting set. The materials and sizes line up with waste lines from sinks and showers. Many setups keep separate hardware for drinking water lines. Using this kit for grey water helps you keep that distinction clear in the van plumbing.
Suitable for converting a 110L universal water tank into a grey water tank in caravan or RV plumbing setups. Uses 1 1/2" BSP DN40 connections for main outlet and adaptor. Uses 1/2" BSP DN15 ports for the cap and breather. Breather barb is 13mm for hose connection. Install in line with the tank outlet and breather ports for controlled grey water discharge and venting.
- Straightforward kit for 110L tanks
- 40mm valve matches DN40 outlets
- 13mm breather keeps tank vented
- 15mm cap seals spare tank ports
- Plastic fittings keep the setup light
- Suit tank capacity: 110L universal grey water tank
- Kit type: Grey water fitting kit
- Connection size (valve): 40mm (1 1/2" BSP DN40)
- Connection size (cap): 15mm (1/2" BSP DN15)
- Breather barb size: 13mm (1/2" BSP 13mm barb)
- Inset adaptor thread: 40mm (1 1/2" BSP DN40)
- Materials: Mixed plastic components
- Colour: Mixed (black and white components)
- Brand: Camec
- Application: Caravan and RV grey water plumbing
- 40mm ball valve x 1
- 15mm cap x 1
- 13mm breather fitting x 1
- 40mm inset adaptor x 1
| SKU | 050606-A |
|---|---|
| Barcode # | 050606-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
More info
The Camec Grey Water Fitting Kit 110L hooks up to a universal 110L tank so you can run a proper grey water setup under the van. A 40mm ball valve on 1 1/2" BSP threads lets you hold or dump sink and shower waste at dump points on the highway. A 13mm breather and 15mm cap tidy up spare ports so the tank does its job without drama on corrugated tracks. This kit uses mixed plastic fittings sized to DN40 and DN15 so it lines up with the plumbing already under most Aussie caravans. The 40mm inset adaptor keeps the outlet low and compact which helps when clearance is tight over rocks or gutters. The plastic build shrugs off soaps and detergents and saves weight compared with brass gear so it is a smart buy for keeping grey water sorted from the bush to the beach.
- Suits 110L universal water tanks for grey water use
- Includes 40mm ball valve with 1 1/2" BSP threads
- 40mm inset adaptor matches DN40 tank outlets
- 13mm breather fitting with 1/2" BSP thread
- 15mm cap suits 1/2" BSP DN15 ports
- Mixed plastic construction for low weight plumbing
- Kit completes outlet and vent fittings on grey tanks
- Compatible with common Australian caravan plumbing sizes
- Ideal for sinks and shower grey water lines
- Brand: Camec, caravan and RV specialist
Q: Does this kit include the actual 110L water tank?
No, this kit only includes the fittings. You use it with a separate 110L universal tank already installed or purchased on its own. The gear focuses on outlet control and venting instead of storage volume. Pair it with a compatible tank to complete a full grey water setup.
Q: What hose size suits the breather fitting in this kit?
The breather is sized for 13mm hose. That means standard 13mm caravan breather hose will push over the barb without extra adaptors. A good breather run helps the 110L tank drain properly. It also reduces smell issues by letting gases escape through a designated line.
Q: What thread size is used on the main outlet valve?
The main valve uses 1 1/2" BSP threads. This matches DN40 fittings common on caravan grey water tanks and plumbing. You can connect it to compatible 40mm pipe or hose tails. Always check your existing outlet size before ordering to keep the install straightforward.
Q: Is the kit suitable for fresh water use as well as grey water?
The kit is supplied as a grey water fitting set. The materials and sizes line up with waste lines from sinks and showers. Many setups keep separate hardware for drinking water lines. Using this kit for grey water helps you keep that distinction clear in the van plumbing.
Suitable for converting a 110L universal water tank into a grey water tank in caravan or RV plumbing setups. Uses 1 1/2" BSP DN40 connections for main outlet and adaptor. Uses 1/2" BSP DN15 ports for the cap and breather. Breather barb is 13mm for hose connection. Install in line with the tank outlet and breather ports for controlled grey water discharge and venting.
- Straightforward kit for 110L tanks
- 40mm valve matches DN40 outlets
- 13mm breather keeps tank vented
- 15mm cap seals spare tank ports
- Plastic fittings keep the setup light
- Suit tank capacity: 110L universal grey water tank
- Kit type: Grey water fitting kit
- Connection size (valve): 40mm (1 1/2" BSP DN40)
- Connection size (cap): 15mm (1/2" BSP DN15)
- Breather barb size: 13mm (1/2" BSP 13mm barb)
- Inset adaptor thread: 40mm (1 1/2" BSP DN40)
- Materials: Mixed plastic components
- Colour: Mixed (black and white components)
- Brand: Camec
- Application: Caravan and RV grey water plumbing
- 40mm ball valve x 1
- 15mm cap x 1
- 13mm breather fitting x 1
- 40mm inset adaptor x 1
| SKU | 050606-A |
|---|---|
| Barcode # | 050606-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
