Roadsafe 4WD have identified a requirement for a program supplying replacement Upper Control Arm’s (UCA) that are fitted to a wide range of late model IFS vehicles. As a result Roadsafe now have available the “Blackhawk UCA” program featuring products that will simply “bolt-in” offering marked improvements over the OE design, for a variety of applications.
Roadsafe "BLACKHAWK" Upper Arms are designed with 3 degrees fixed caster and optimally suited to lifts of 30-70mm, finished in dual layer coating including black e-coat and Gloss Black Powder Coat for maximum durability, rust prevention and discreet installation.
Features & Benefits - Upper Control Arms:
- Angled Ball joint Aperture - allows for better articulation of the ball stud.
- Repositioned Ball Joint Aperture - 3 degrees increased caster.
- Repositioned Ball Joint Aperture – maintains camber.
- OE Spec Ball Joint Aperture - takes standard factory or aftermarket ball joint.
- Revised Radius Bends (Internal) - increased suspension articulation.
- Revised Radius Bends (External) - allows fitment of larger tyres.
- OE Spec Bushing Aperture - takes standard factory or aftermarket bushings.
- Heavy Duty 350mpa 32mm OD Tube (6mm wall) – increased strength over factory arm unit
- Powder Coat finish - Dual layered coating with a Gloss Black Powdercoat
- Built for 30–70 mm lifted Cruisers
- Three degrees caster helps alignment
- 32 mm tube with 6 mm wall thickness
- Dual layer e-coat and powder coat
- OE spec joints keep parts simple
- Vehicle compatibility: Toyota 200 Series Landcruiser front axle GVM upgrade 2007-on
- Application: Front axle upper control arm kit
- Fixed caster increase: 3 degrees
- Recommended suspension lift range: 30–70 mm
- Tube outside diameter: 32 mm
- Tube wall thickness: 6 mm
- Material rating: Heavy duty 350 MPa tube
- Coating: Dual layer black e-coat plus gloss black powder coat
- Ball joint aperture: OE spec to accept standard or aftermarket ball joints
- Bushing aperture: OE spec to accept standard or aftermarket bushes
- Ball joint aperture style: Angled for increased ball stud articulation
- Internal radius bends: Revised for increased suspension articulation
- External radius bends: Revised to allow fitment of larger tyres
- 1 x pair Blackhawk upper control arms
- Pre-installed OE-spec bushing apertures
- Pre-installed OE-spec ball joint apertures
| SKU | UCA3841TV2 |
|---|---|
| Barcode # | 9319478666030 |
| Brand | Blackhawk |
| Shipping Weight | 8.0000kg |
Upper Control Arm Kit to suit Toyota 200 Series Landcruiser - Front Axle GVM Upgrade 07-On
More infoMake 4 payments of $174.75 over 8 weeks and get it now!
Calculate Shipping
Roadsafe 4WD have identified a requirement for a program supplying replacement Upper Control Arm’s (UCA) that are fitted to a wide range of late model IFS vehicles. As a result Roadsafe now have available the “Blackhawk UCA” program featuring products that will simply “bolt-in” offering marked improvements over the OE design, for a variety of applications.
Roadsafe "BLACKHAWK" Upper Arms are designed with 3 degrees fixed caster and optimally suited to lifts of 30-70mm, finished in dual layer coating including black e-coat and Gloss Black Powder Coat for maximum durability, rust prevention and discreet installation.
Features & Benefits - Upper Control Arms:
- Angled Ball joint Aperture - allows for better articulation of the ball stud.
- Repositioned Ball Joint Aperture - 3 degrees increased caster.
- Repositioned Ball Joint Aperture – maintains camber.
- OE Spec Ball Joint Aperture - takes standard factory or aftermarket ball joint.
- Revised Radius Bends (Internal) - increased suspension articulation.
- Revised Radius Bends (External) - allows fitment of larger tyres.
- OE Spec Bushing Aperture - takes standard factory or aftermarket bushings.
- Heavy Duty 350mpa 32mm OD Tube (6mm wall) – increased strength over factory arm unit
- Powder Coat finish - Dual layered coating with a Gloss Black Powdercoat
- Built for 30–70 mm lifted Cruisers
- Three degrees caster helps alignment
- 32 mm tube with 6 mm wall thickness
- Dual layer e-coat and powder coat
- OE spec joints keep parts simple
- Vehicle compatibility: Toyota 200 Series Landcruiser front axle GVM upgrade 2007-on
- Application: Front axle upper control arm kit
- Fixed caster increase: 3 degrees
- Recommended suspension lift range: 30–70 mm
- Tube outside diameter: 32 mm
- Tube wall thickness: 6 mm
- Material rating: Heavy duty 350 MPa tube
- Coating: Dual layer black e-coat plus gloss black powder coat
- Ball joint aperture: OE spec to accept standard or aftermarket ball joints
- Bushing aperture: OE spec to accept standard or aftermarket bushes
- Ball joint aperture style: Angled for increased ball stud articulation
- Internal radius bends: Revised for increased suspension articulation
- External radius bends: Revised to allow fitment of larger tyres
- 1 x pair Blackhawk upper control arms
- Pre-installed OE-spec bushing apertures
- Pre-installed OE-spec ball joint apertures
| SKU | UCA3841TV2 |
|---|---|
| Barcode # | 9319478666030 |
| Brand | Blackhawk |
| Shipping Weight | 8.0000kg |
