Poly Water Tank 42 Lt Vertical with wheel arch cut-outs. 1/2in BSP brass outlet
Dimensions: 1295mm wide x 600mm high ( 30mm for cap) 75mm thick. The cutout each side is 200mm wide x 300mm high. An additional small rebate contains the brass outlet.

Brass outlet uses 1/2" BSPT thread to allow normal hardware plumbing fittings to be used for custom hose or pump kits.

Or you may prefer to order our Hose or Pump kits

Dimensions:
Length: 1295mm
Width: 600mm

Important Fitment Note:
Please note: We advise that all water tank installations should only be done by a qualified person and it is the responsibility of this person to ensure correct installation and fitment.

Seaflo RV1-030-055-42 RV Supreme MK2 12v Pump
The Seaflo Pump is a top quality RV pump that is self priming and run dry safe. It has a quiet operation and can be used on demand. It has an industry standard mounting pattern and is completely rubber mounted. It uses internal bypass technology to reduce cycling and has a 16 AWG, 9.4″ long power cord with an encapsulated switch. This pump is a great choice for your RV needs.

FEATURES AND BENEFITS:
Up to 3.0 GPM
Self priming
Run dry safe
Quiet operation
On-demand use
Industry Standard mounting pattern
Completely rubber mounting-base
Internal bypass technology reduces cycling
16 AWG, 9.4″ long with encapsulated switch

SPECIFICATIONS:
Voltage 12V DC
Max recommended temperature 60 degrees
GPM/LPM 3.0/11.3
PSI/BAR 55/3.8
Max Draw (A) 6.0
Valves EPDM
Diaphragm Santoprene
Ports 1/2″-14 MNPT
Wire Connections 2-Pin/Leads
Weight 1.9 kg

WHAT IS INCLUDED:
This pump comes in the retail box with detailed instructions, a filter plus 3 fittings ensuring an easy installation.

IMPORTANT INFORMATION:
Please note: the 1 x all-white round accessory is pre-installed by the manufacturer.

Seaflo RV1-030-055-42 RV Supreme MK2 Pump Specifications Sheet

FAQ on the Seflo RV Supreme MK2 12v
Is the Seaflo RV Supreme MK2 self-priming?
Yes, the Seaflo RV Supreme MK2 is a self-priming pump. That means it can automatically draw water up into itself after being installed, without needing to be manually filled first. This makes setup easier, especially when replacing an old pump or when your water tank is mounted lower than the pump. It also helps restart the system quickly after running dry or doing maintenance.

What makes the Seaflo RV Supreme MK2 a popular choice?
The Seaflo RV Supreme MK2 is rated as the quietest pump in the caravan industry. It has a flow rate of 9.5 liters per minute (LPM). The filter should be installed within 200 to 300 mm before the pump itself, not after it.

The pump uses the most popular mounting sizes. It self-primes and operates up to 55 PSI (3.8 BAR). The pump runs efficiently, using approximately 4.2 to 4.3 amps at full operation but can range from 3 to 6 amps depending on usage.

What is the difference between the Seaflo RV Supreme MK2 Shurflo 4009?
To compare them we've got the following table for you.

Feature Seaflo RV Supreme MK2 Shurflo 4009
Self-Priming Yes Yes
Run Dry Safe Yes Yes
Pressure 55 PSI 45 PSI
Power Draw 6.0 Amps 7.5 Amps
Noise Level Quiet Louder
Technology Internal bypass Internal bypass
Mounting Pattern Industry standard Industry standard
Additional Features Filter and fittings Basic package

The Seaflo RV Supreme MK2 offers more features, higher efficiency, and quieter operation compared to the Shurflo 4009, making it a popular choice for many RV owners