This Sam Allen tube clip grabs a round tube between 40 mm and 45 mm outer diameter and holds it tight against a bulkhead or side wall. The gear works well for parking a paddle or oar so it stays put when the hull slaps around. You just line up two clips along the shaft and the setup stops the handle rolling across a 2 metre floor.
The clip body uses nylon plastic in a solid one piece mould with two screw holes in the base. The opening suits round gear like alloy paddle shafts and standard 40 mm handle tubes. The black finish looks tidy against most marine trims and shrugs off a bit of grime. For the price it is a smart buy when you want simple storage that handles regular trips on Aussie water.
- Suits tube outside diameters from 40 mm to 45 mm
- Moulded from black nylon plastic
- Two fastening holes in the base for mounting
- Ideal for securing paddles and oars on boats
- Compact design for use in tight storage spaces
- Holds one tube or shaft per clip
- Compatible with flat mounting surfaces such as bulkheads
- Lightweight alternative to metal clamps
- Black colour blends with common marine hardware
Q: What tube sizes does this clip suit?
This clip suits tubes with an outside diameter between 40 mm and 45 mm. That covers many common alloy and plastic paddle shafts. Always measure the outside of your tube with a ruler or caliper before you order. A tube outside that range may not sit firmly in the clip.
Q: How many clips do I need to hold one paddle?
Most setups use two clips per paddle. One clip supports the blade end and one clip supports the handle end. This stops the shaft flexing or rattling on rough water. You can add a third clip for very long or heavy gear if you want extra support.
Q: Are the mounting screws supplied with the clip?
No mounting screws are supplied with this clip. You choose screws to match the surface on your boat such as timber, alloy, or fibreglass. Use corrosion resistant marine grade screws where possible. Pre drilling pilot holes can help avoid splitting timber mounting points.
Q: Where is this tube clip commonly installed on a boat?
This clip is commonly mounted along side decks bulkheads or cabin walls. Many owners also fit them under seat fronts to keep paddles off the floor. The two hole base sits flat so it works on vertical or horizontal surfaces. Position the clips so stored gear does not block hatches or walking space.
Suitable for securing round tubes with an outside diameter between 40 mm and 45 mm.
Mounts to a flat surface using two fasteners through the integrated holes.
Commonly used to hold paddles and oars on marine craft or storage areas.
Fastener type and size depend on the mounting surface and are not included.
- Sized for 40–45mm round tubes
- Nylon gear that handles weekend trips
- Two-hole base keeps the clip steady
- Black finish hides deck scuffs well
- Smart buy for simple paddle storage
- Material: nylon plastic
- Colour: black
- Tube size capacity: 40–45 mm outside diameter
- Mounting: two fastening holes in base
- 1 x nylon tube clip 40–45mm black
| SKU | 35923 |
|---|---|
| Barcode # | 9330121115437 |
| Brand | Sam Allen |
| Shipping Weight | 0.3000kg |
More info
This Sam Allen tube clip grabs a round tube between 40 mm and 45 mm outer diameter and holds it tight against a bulkhead or side wall. The gear works well for parking a paddle or oar so it stays put when the hull slaps around. You just line up two clips along the shaft and the setup stops the handle rolling across a 2 metre floor.
The clip body uses nylon plastic in a solid one piece mould with two screw holes in the base. The opening suits round gear like alloy paddle shafts and standard 40 mm handle tubes. The black finish looks tidy against most marine trims and shrugs off a bit of grime. For the price it is a smart buy when you want simple storage that handles regular trips on Aussie water.
- Suits tube outside diameters from 40 mm to 45 mm
- Moulded from black nylon plastic
- Two fastening holes in the base for mounting
- Ideal for securing paddles and oars on boats
- Compact design for use in tight storage spaces
- Holds one tube or shaft per clip
- Compatible with flat mounting surfaces such as bulkheads
- Lightweight alternative to metal clamps
- Black colour blends with common marine hardware
Q: What tube sizes does this clip suit?
This clip suits tubes with an outside diameter between 40 mm and 45 mm. That covers many common alloy and plastic paddle shafts. Always measure the outside of your tube with a ruler or caliper before you order. A tube outside that range may not sit firmly in the clip.
Q: How many clips do I need to hold one paddle?
Most setups use two clips per paddle. One clip supports the blade end and one clip supports the handle end. This stops the shaft flexing or rattling on rough water. You can add a third clip for very long or heavy gear if you want extra support.
Q: Are the mounting screws supplied with the clip?
No mounting screws are supplied with this clip. You choose screws to match the surface on your boat such as timber, alloy, or fibreglass. Use corrosion resistant marine grade screws where possible. Pre drilling pilot holes can help avoid splitting timber mounting points.
Q: Where is this tube clip commonly installed on a boat?
This clip is commonly mounted along side decks bulkheads or cabin walls. Many owners also fit them under seat fronts to keep paddles off the floor. The two hole base sits flat so it works on vertical or horizontal surfaces. Position the clips so stored gear does not block hatches or walking space.
Suitable for securing round tubes with an outside diameter between 40 mm and 45 mm.
Mounts to a flat surface using two fasteners through the integrated holes.
Commonly used to hold paddles and oars on marine craft or storage areas.
Fastener type and size depend on the mounting surface and are not included.
- Sized for 40–45mm round tubes
- Nylon gear that handles weekend trips
- Two-hole base keeps the clip steady
- Black finish hides deck scuffs well
- Smart buy for simple paddle storage
- Material: nylon plastic
- Colour: black
- Tube size capacity: 40–45 mm outside diameter
- Mounting: two fastening holes in base
- 1 x nylon tube clip 40–45mm black
| SKU | 35923 |
|---|---|
| Barcode # | 9330121115437 |
| Brand | Sam Allen |
| Shipping Weight | 0.3000kg |
