The Lowrance TripleShot Skimmer Transducer runs a single housing and a 6 m lead so you can mount on the transom and still hit a centre console up front. The 19.7 ft length means you can route the cable along gunwales on a 5 m tinny without stretching it. The TripleShot setup suits anglers chasing structure detail straight under the hull where every metre of clear signal helps find drop-offs and snags.

The gear uses a compact skimmer body with a fixed bracket and an integrated 6 m cable so there are no extra joins near the waterline. The connector plugs straight into compatible Lowrance head units that accept TripleShot inputs at standard recreational power ratings. The outer sheath is thick enough to handle rubbing against alloy or glass and regular trailering across boat ramps, carparks, and rough tracks.

• Genuine Lowrance TripleShot Skimmer transducer
• Supplied with integrated 6 m (19.7 ft) cable
• Suits compatible Lowrance sounder and fishfinder units
• Compact skimmer housing for transom mounting
• Long cable reach suits centre and side consoles
• Moulded connector for straightforward head unit hookup
• Plastic housing suited to typical marine environments
• Ideal replacement option for worn TripleShot transducers
• Simple physical layout keeps transom area uncluttered

Q: How long is the cable on the Lowrance TripleShot Skimmer Transducer?

The cable length is 6 metres. This gives you about 19.7 feet of reach from the transom to the sounder. It suits most small trailer boats with consoles set a fair way forward. The extra length helps you run the cable along gunwales or under decks without tight bends. That makes the setup cleaner and reduces strain on the connector.

Q: What style of mounting does this TripleShot Skimmer Transducer use?

It is a transom-mount style housing. The skimmer body is shaped to sit low on the transom beside the outboard leg. That spot keeps the active face in the water at speed on most hulls. A transom mount keeps drilling to the back of the boat only. It also makes future height or angle tweaks straightforward if your sounder readings need fine-tuning.

Q: Is this transducer suitable for use in salt water?

Yes it is suitable for salt water use. The sealed plastic housing and moulded cable are made for typical marine environments. You should still rinse the gear with fresh water after each salt session. That keeps salt crystals from building up around the bracket and connector. Good rinsing also helps the cable sheath last longer on boats stored outdoors.

Q: Can I use this transducer as a replacement for an older Lowrance unit?

You can use it where your sounder accepts TripleShot inputs. Some Lowrance head units are wired only for other transducer types. You should check your sounder manual or model specs before ordering. Matching the transducer type to the head unit avoids connection issues. If you are unsure our crew can help confirm compatibility before you fit the new gear.