The Camec Tray Rail Pillar End is a small bit of gear that locks a 4 mm rod into place on a tray rail, keeping caravan tables or pantry sections running straight over its 32 mm length. The 10 mm wide body fits easily into narrow rail channels, so you can tackle tight cabinet layouts without hacking things apart. Match it with existing 4 mm hardware and you are good to get out there.
This pillar end uses a nickel plated metal body with an overall size of 32 mm by 10 mm, a smart buy when you want hardware that keeps its shape after plenty of weekends away. The nickel finish handles the mix of dust, moisture and temperature shifts common in Australian caravans. Pair it with quality tray rail gear and you have a setup built tough enough for regular highway and gravel use.
- Camec tray rail pillar end for caravan and RV furniture
- Suits tray rail assemblies using 4 mm rods
- Compact body measures 32 mm x 10 mm
- Nickel plated finish for added surface protection
- Ideal for tables, trays and pantry slide rails
- Allows accurate location of 4 mm guide rod
- Supplied as hardware only with no bolts included
- Fits tight cabinetry spaces thanks to slim 10 mm width
- Useful spare or replacement part for existing Camec-style rails
- Simple component for light duty tray rail support
Q: Does this tray rail pillar end fit any rod size?
No, this pillar end is made for 4 mm rods. Using it with a larger or smaller rod can cause looseness or binding in the rail. Always check your existing rod diameter with a ruler or caliper. Matching the 4 mm size keeps the tray running smoothly and reduces wear.
Q: Are mounting bolts included with this Camec pillar end?
No, bolts are not included. This lets you choose bolt or screw types that match your rail and cabinet material. Use hardware that suits the thickness of your furniture panel. Tighten to firm contact without over-torquing and crushing the surrounding material.
Q: Can I use this pillar end in non-caravan furniture?
Yes, you can use it anywhere a 4 mm rod tray rail is installed. It works in custom cupboards, camper trailers, or home storage if they use the same rod size. Just make sure the 32 mm by 10 mm body fits your available space. Always match it with compatible tray rail components.
Q: How many pillar ends do I need for a tray rail run?
The pack includes one pillar end, so you will need to order the number required for your specific rail layout. Many tray systems will use at least two ends, one at each termination. Check your existing rail or plan your build before ordering. Keeping a spare in your kit can help with repairs on the road.
- Suits 4 mm rods only
- Intended for tray rail assemblies in caravan and RV furniture setups
- Check existing rail and rod size before installation
- Requires suitable bolts or screws selected to match your substrate
- Fitment should follow standard hardware practices for caravan furniture rails
- Sized for common 4 mm rods
- 32 mm length suits compact cabinetry
- Nickel plated body made to last
- Easy spare to keep in the kit
- Smart buy for caravan rail repairs
- Brand: Camec
- Component type: tray rail pillar end
- Finish: nickel plated
- Compatible rod diameter: 4 mm
- Overall dimensions: 32 mm length x 10 mm width
- Fasteners: bolts not included
- Typical application: caravan and RV tray or table rail setups
- 1 x Camec tray rail pillar end (nickel plated)
| SKU | 008223-A |
|---|---|
| Barcode # | 008223 |
| Brand | Camec |
| Shipping Weight | 0.0100kg |
More info
The Camec Tray Rail Pillar End is a small bit of gear that locks a 4 mm rod into place on a tray rail, keeping caravan tables or pantry sections running straight over its 32 mm length. The 10 mm wide body fits easily into narrow rail channels, so you can tackle tight cabinet layouts without hacking things apart. Match it with existing 4 mm hardware and you are good to get out there.
This pillar end uses a nickel plated metal body with an overall size of 32 mm by 10 mm, a smart buy when you want hardware that keeps its shape after plenty of weekends away. The nickel finish handles the mix of dust, moisture and temperature shifts common in Australian caravans. Pair it with quality tray rail gear and you have a setup built tough enough for regular highway and gravel use.
- Camec tray rail pillar end for caravan and RV furniture
- Suits tray rail assemblies using 4 mm rods
- Compact body measures 32 mm x 10 mm
- Nickel plated finish for added surface protection
- Ideal for tables, trays and pantry slide rails
- Allows accurate location of 4 mm guide rod
- Supplied as hardware only with no bolts included
- Fits tight cabinetry spaces thanks to slim 10 mm width
- Useful spare or replacement part for existing Camec-style rails
- Simple component for light duty tray rail support
Q: Does this tray rail pillar end fit any rod size?
No, this pillar end is made for 4 mm rods. Using it with a larger or smaller rod can cause looseness or binding in the rail. Always check your existing rod diameter with a ruler or caliper. Matching the 4 mm size keeps the tray running smoothly and reduces wear.
Q: Are mounting bolts included with this Camec pillar end?
No, bolts are not included. This lets you choose bolt or screw types that match your rail and cabinet material. Use hardware that suits the thickness of your furniture panel. Tighten to firm contact without over-torquing and crushing the surrounding material.
Q: Can I use this pillar end in non-caravan furniture?
Yes, you can use it anywhere a 4 mm rod tray rail is installed. It works in custom cupboards, camper trailers, or home storage if they use the same rod size. Just make sure the 32 mm by 10 mm body fits your available space. Always match it with compatible tray rail components.
Q: How many pillar ends do I need for a tray rail run?
The pack includes one pillar end, so you will need to order the number required for your specific rail layout. Many tray systems will use at least two ends, one at each termination. Check your existing rail or plan your build before ordering. Keeping a spare in your kit can help with repairs on the road.
- Suits 4 mm rods only
- Intended for tray rail assemblies in caravan and RV furniture setups
- Check existing rail and rod size before installation
- Requires suitable bolts or screws selected to match your substrate
- Fitment should follow standard hardware practices for caravan furniture rails
- Sized for common 4 mm rods
- 32 mm length suits compact cabinetry
- Nickel plated body made to last
- Easy spare to keep in the kit
- Smart buy for caravan rail repairs
- Brand: Camec
- Component type: tray rail pillar end
- Finish: nickel plated
- Compatible rod diameter: 4 mm
- Overall dimensions: 32 mm length x 10 mm width
- Fasteners: bolts not included
- Typical application: caravan and RV tray or table rail setups
- 1 x Camec tray rail pillar end (nickel plated)
| SKU | 008223-A |
|---|---|
| Barcode # | 008223 |
| Brand | Camec |
| Shipping Weight | 0.0100kg |
