Enerdrive Traveller System 40AC 40DC with Simarine SCQ50 gives you 40A AC charging and 40A DC-DC charging in one tidy passenger side kit so you can run a 12V fridge and lights without guessing what the battery is doing. The Simarine screen shows volts to around 0.1V and amps for each channel so you can see how a 5A light circuit or 8A fridge actually hits your setup when you park up. The housing is a powder-coated steel box about 1.5mm thick with a front panel that holds rocker switches and a reset button plus USB and accessory sockets rated around 12V. The SCQ50 module tracks up to four circuits at roughly 50A each so you can split fridge outlets lights and general sockets. The chargers sit behind the face panel so dust and gear in the canopy do not crowd the wiring. The kit comes with an Enerdrive 5 year warranty for touring in Aussie conditions.

• Enerdrive Traveller 40AC 40DC passenger-side system
• 40A 240V AC battery charger included
• 40A DC-DC charger for alternator input
• Integrated Simarine SCQ50 monitoring package
• Suits 12V auxiliary or house battery banks
• Pre-mounted in powder-coated metal enclosure
• Front panel switches for multiple fused circuits
• Simarine display shows voltage and current draw
• Passenger-side layout ideal for canopy installs
• Enerdrive 5-year warranty for touring use

Q: Can this Traveller System charge a 12V lithium house battery?

Yes it can charge a suitable 12V lithium house battery when correctly configured. The Enerdrive 40A AC and 40A DC-DC chargers are built to work with common 12V lithium profiles offered by the brand. You still need to match charger settings to your actual battery spec sheet. If you are unsure our crew can talk through capacity and charge limits for your setup.

Q: Is the Simarine SCQ50 display included with the Traveller System 40AC 40DC?

Yes the Simarine SCQ50 monitoring gear is included. The face panel shows battery state of charge voltage and current draw on separate channels. This lets you see what each circuit is pulling in real time. It helps you decide when to back off loads or start the vehicle to put 40A back into the bank.

Q: Does the system handle both mains power and alternator input without manual switching?

Yes the chargers are wired so the AC unit handles 240V power and the DC-DC unit handles alternator or solar input without manual changeover. When you plug into mains the 40A AC charger does the work. On the road the 40A DC-DC charger takes over. This keeps charge rates predictable and avoids back-feeding the vehicle system.

Q: Can I mount this system in a canopy or van interior on the passenger side?

Yes the kit is laid out for a passenger side wall or cabinet mount. You still need enough flat space for the enclosure and safe ventilation around the chargers. Mount it where the Simarine screen is easy to see from the door or tailgate. Keep high current cabling short to the house battery bank for best performance.

Parent SKU K-TRAVELLER-03 indicates other mount positions or configurations may be available under the Traveller System 40AC 40DC Inc Simarine SCQ50 range.

Mount position is specified as passenger side. System is intended for 12V touring setups that require a combined 240V AC and DC-DC charging system with integrated monitoring. Specific vehicle makes or models are not listed so installation layout must be checked against available passenger side space in the chosen vehicle or canopy.