This TAG Weight Distribution Hitch Shank with a 100 mm drop helps line up the tow ball height when your caravan or trailer sits higher than the hitch. The multiple adjustment holes let you set the head height to suit different drawbars without changing the rest of your towing kit. The solid steel section handles typical touring van loads so you can tow gear for longer trips without fighting an uneven rig. The shank runs a straight 100 mm vertical drop with evenly spaced pin holes for fine tuning the ball position. The steel section comes with a black protective coating that stands up to road grime and light stone strike on outback runs. The welded bracing keeps flex down under tongue weight so steering feel stays consistent. Pair it with a matching TAG weight distribution head and bars to round out a smart buy towing setup.

• TAG Weight Distribution Hitch Shank with 100mm drop
• Suits caravans and trailers needing lower ball height
• Multiple adjustment holes for tow ball fine tuning
• Heavy steel construction for typical touring loads
• Welded bracing on drop section for extra stiffness
• Black protective coating helps resist chips and rust
• Works with compatible weight distribution heads and bars
• Simple way to correct trailer and vehicle height mismatch
• Ideal for 4x4 and towing setups using weight distribution gear
• Sold as shank only so existing hitch parts can be reused

Q: Does this shank include the weight distribution head and bars?

No, this shank is supplied on its own as the vertical mounting piece. You add your existing or new weight distribution head and spring bars to complete the setup. This keeps things flexible if you already run a TAG kit. It also means you only replace the shank when you change vehicles or trailer height, not the whole hitch.

Q: Can I adjust the tow ball height with this shank?

Yes, the shank has multiple mounting holes so you can move the head up or down. Each hole change shifts the tow ball height in small steps. That lets you dial in a level rig between different trailers. A level setup helps keep steering and braking more predictable over long distances.

Q: Is the 100mm drop fixed on this model?

Yes, this model has a fixed 100mm vertical drop built into the main section. You still get fine adjustment using the mounting holes. If your drawbar needs more or less correction than 100mm, you would look at a different shank size. Sticking with the right drop size keeps the head range in the middle of the slots.

Q: Will this shank work with standard 4x4 tow vehicles?

The shank is intended for typical 4x4 and touring tow rigs that use weight distribution hitches. It suits setups where the caravan or trailer coupling ends up higher than the factory tow point. Always match the shank to a compatible weight distribution head. Make sure the combined setup stays within the tow and towbar ratings for your vehicle.