If you run a Toyota Camry XV70 petrol from 11/2017 on and need to tow a box trailer or small camper this TAG heavy duty towbar gives you a solid square hitch setup. The 50 mm receiver works with common towball mounts and cargo carriers so you can haul gear for a weekend away or a tip run. The bar tucks under the rear so you keep normal boot space and everyday driving manners.

The cross tube and side arms are welded steel sections built tough for repeated towing loads and typical towball heights around 350–450 mm. A black powder-coated finish adds a protective skin roughly 60–80 µm thick to handle road grime and wet conditions. High-tensile bolts clamp the bar to the chassis so the load spreads along both rails instead of one thin point. It is a smart buy if you want proven towing gear for a Camry without overcomplicating the setup.

  • Heavy duty TAG towbar assembly
  • Suits Toyota Camry XV70 petrol models
  • Fitment from build date 11/2017 onwards
  • Square hitch receiver accepts tow accessories
  • Steel cross tube and side arm construction
  • Underbody mounting keeps boot space unchanged
  • Black coated finish for added surface protection
  • Allows towing of trailers and carriers within vehicle limits
  • Compatible with standard towball mounts and pins
  • Purpose-built for passenger sedan towing duties

Q: Does this towbar fit all Toyota Camry XV70 petrol models from 11/2017?

It is specified for Toyota Camry XV70 petrol models built from 11/2017 onwards. Always check your build plate to confirm the XV70 series and petrol engine. If your car is a hybrid or earlier generation you will need a different bar. Our crew can help confirm compatibility before you order.

Q: Can I use standard 50 mm hitch accessories with this towbar?

Yes, the towbar uses a typical square hitch receiver suited to 50 mm style accessories. That means common towball mounts, cargo carriers, and bike racks will usually fit. Always match the accessory rating to the towbar and vehicle limits. Secure pins and clips must be used every time you tow or carry gear.

Q: Will this towbar affect boot access on the Camry?

The towbar mounts under the rear and typically keeps full access to the boot. The hitch receiver sits below the bumper so you can still open the boot with the towball mount fitted. Longer accessories may extend past the rear when installed. Always allow clearance when parking or loading gear.

Q: Is wiring included with this towbar setup?

This listing covers the towbar hardware only unless stated otherwise. Trailer wiring looms and sockets are usually supplied as separate kits. Using a dedicated wiring harness helps protect the vehicle electronics. Our team can suggest compatible wiring gear for the Camry XV70 petrol range.

Vehicle compatibility: Toyota Camry XV70 Petrol built from 11/2017 onwards.

  • Proven TAG heavy duty towbar
  • Gear made to handle Aussie roads
  • Square hitch suits everyday towing setups
  • Steel bar built to go the distance
  • Smart buy for Camry touring duties
SKU T7T821
Barcode # OEBC708739
Brand TAG
Shipping Weight 31.0000kg
Shipping Width 0.400m
Shipping Height 1.200m
Shipping Length 0.400m

TAG Heavy Duty Towbar For Toyota Camry XV70 Petrol (11/2017 - On)

SKU: T7T821
Sale price

$805.00

REG
$624.50 SALE
Earn 6,240 PTS on this item. Login or Join Free
GEAR'd Logo
REG $805.00
SALE ENDS
Dispatch in 7 days
Sale price

$805.00

REG
$624.50 SALE
PayPal Checkout
4 payments of $156.12

afterpay More info.

Make 4 payments of $156.12 over 8 weeks and get it now!

zipMoney
From $10 / week
Afterpay
4 payments of $156.12
Humm

Calculate Shipping

If you run a Toyota Camry XV70 petrol from 11/2017 on and need to tow a box trailer or small camper this TAG heavy duty towbar gives you a solid square hitch setup. The 50 mm receiver works with common towball mounts and cargo carriers so you can haul gear for a weekend away or a tip run. The bar tucks under the rear so you keep normal boot space and everyday driving manners.

The cross tube and side arms are welded steel sections built tough for repeated towing loads and typical towball heights around 350–450 mm. A black powder-coated finish adds a protective skin roughly 60–80 µm thick to handle road grime and wet conditions. High-tensile bolts clamp the bar to the chassis so the load spreads along both rails instead of one thin point. It is a smart buy if you want proven towing gear for a Camry without overcomplicating the setup.

  • Heavy duty TAG towbar assembly
  • Suits Toyota Camry XV70 petrol models
  • Fitment from build date 11/2017 onwards
  • Square hitch receiver accepts tow accessories
  • Steel cross tube and side arm construction
  • Underbody mounting keeps boot space unchanged
  • Black coated finish for added surface protection
  • Allows towing of trailers and carriers within vehicle limits
  • Compatible with standard towball mounts and pins
  • Purpose-built for passenger sedan towing duties

Q: Does this towbar fit all Toyota Camry XV70 petrol models from 11/2017?

It is specified for Toyota Camry XV70 petrol models built from 11/2017 onwards. Always check your build plate to confirm the XV70 series and petrol engine. If your car is a hybrid or earlier generation you will need a different bar. Our crew can help confirm compatibility before you order.

Q: Can I use standard 50 mm hitch accessories with this towbar?

Yes, the towbar uses a typical square hitch receiver suited to 50 mm style accessories. That means common towball mounts, cargo carriers, and bike racks will usually fit. Always match the accessory rating to the towbar and vehicle limits. Secure pins and clips must be used every time you tow or carry gear.

Q: Will this towbar affect boot access on the Camry?

The towbar mounts under the rear and typically keeps full access to the boot. The hitch receiver sits below the bumper so you can still open the boot with the towball mount fitted. Longer accessories may extend past the rear when installed. Always allow clearance when parking or loading gear.

Q: Is wiring included with this towbar setup?

This listing covers the towbar hardware only unless stated otherwise. Trailer wiring looms and sockets are usually supplied as separate kits. Using a dedicated wiring harness helps protect the vehicle electronics. Our team can suggest compatible wiring gear for the Camry XV70 petrol range.

Vehicle compatibility: Toyota Camry XV70 Petrol built from 11/2017 onwards.

  • Proven TAG heavy duty towbar
  • Gear made to handle Aussie roads
  • Square hitch suits everyday towing setups
  • Steel bar built to go the distance
  • Smart buy for Camry touring duties
SKU T7T821
Barcode # OEBC708739
Brand TAG
Shipping Weight 31.0000kg
Shipping Width 0.400m
Shipping Height 1.200m
Shipping Length 0.400m