The TAG Heavy Duty Towbar for Mitsubishi Triton MV Cab Chassis (2024-on) gives your ute a proper hitch point for towing work trailers or a camper behind a 3500 kg rated setup. This gear sits tight under the tray so you keep decent departure angle when you duck off the bitumen. The standard 50 mm receiver suits common tow tongues, so you can swap between a box trailer and a 2000 kg camper without drama.

TAG builds this bar from thick steel plate and a solid cross tube rated to match Triton factory towing specs up to 3500 kg. The black powder coat handles wet seasons and coast air better than bare steel across years of 10,000 km touring runs. Mount points line up with factory chassis holes, so you keep the integrity of the 3220 mm wheelbase frame. If you want a smart buy tow setup, this bar gets it done.

• Heavy duty towbar for Mitsubishi Triton MV Cab Chassis 2024-on
• Suits cab chassis variants using factory chassis mounting points
• Provides a standard 50 mm square hitch receiver
• Compatible with standard 50 mm towballs and tongues
• Cross tube and brackets constructed from thick steel plate
• Black powder coated finish for added corrosion resistance
• Tow rating engineered to match Triton factory towing capacity up to 3500 kg
• Maintains good departure angle under tray-style bodies
• Suitable for towing work trailers, box trailers and camper trailers
• Supplied as a chassis-mounted bar requiring appropriate fitting and wiring

Q: Does this towbar suit all Mitsubishi Triton MV Cab Chassis models from 2024?

Yes, this TAG Heavy Duty Towbar is made for Mitsubishi Triton MV Cab Chassis models from 2024-onwards. Cab chassis variants share the same rear chassis mounting points this bar uses. Always confirm your vehicle build year and MV designation on the compliance plate. If your Triton is a tub-body model, you will need a different towbar.

Q: Can I use a standard 50 mm towball and tongue with this towbar?

Yes, this towbar is built around a standard 50 mm hitch receiver, so it accepts common 50 mm towballs and tongues. That means you can swap between different trailers without special coupling hardware. Just match the towball rating to your trailer and vehicle limits. Always keep the pin and clip in good condition.

Q: Is this towbar suitable for towing a camper trailer on gravel roads?

Yes, a heavy duty bar like this is suited to camper and box trailers on sealed and typical gravel roads, within the rated towing capacity. The chassis-mounted design spreads load across multiple mounting points. Tyre pressures, suspension condition and trailer balance still matter for control. Always drive to conditions and obey the vehicle limits.

Q: Do I need to upgrade the vehicle suspension to use this towbar?

No, you do not have to upgrade suspension just to fit the towbar itself. The bar simply gives the vehicle a rated hitch point. Suspension upgrades may be worth considering if you regularly tow near the vehicle GVM or carry heavy loads. Talk with your mechanic about springs and shocks if the ute sags under load.

Suitable for Mitsubishi Triton MV Cab Chassis from 2024-onwards.