The TAG Heavy Duty Towbar for the Haval Jolion petrol models from 02/2021-on bolts up under the rear and gives you a solid hitch point for towing box trailers, small campers or carrying a bike rack. The square receiver lines up with standard 50 mm hitches so you can swap gear between vehicles and still keep the Jolion ready for weekend runs or a hardware haul.

The bar uses welded steel sections and thick mounting plates that pick up the factory chassis points on the Jolion shell, so load paths stay predictable when you lean on that towball. A tough black coating helps handle stone spray and coastal air on long highway legs. High-tensile bolts clamp the whole setup tight, so you can get out there on country roads knowing the towbar is built tough and a smart buy for this specific SUV.

• Heavy duty towbar for Haval Jolion SUV
• Suits petrol models built from 02/2021-on
• Square hitch receiver accepts standard 50 mm gear
• Vehicle-specific mounting points for this SUV
• Welded steel bar construction for towing loads
• Black coated finish for chip resistance
• Compatible with rear bumper styling on Jolion
• Provides solid tow point for trailers and racks
• Designed as part of TAG HD towbar range

Q: Does this towbar fit diesel or hybrid versions of the Haval Jolion?

No, this towbar is listed for petrol Haval Jolion SUV models from 02/2021-on only. The mounting points and rear structure can differ between engine types, so a bar that suits petrol models may not align on diesel or hybrid variants. Always match the towbar listing to your exact engine type and build date. If your Jolion is not petrol, you will need a different bar.

Q: Can I still use rear parking sensors with this towbar installed?

In most cases, yes, the rear sensors will still operate with the towbar fitted, but they may detect a towball or inserted hitch as an obstacle when reversing. Many drivers remove the hitch tongue when not towing to reduce false alerts. Always test sensor performance after fitment in an open area. Adjust your reversing habits to allow for any change in sensor behaviour.

Q: Do I need wiring added as well as the towbar itself?

Yes, a dedicated wiring harness or loom is required so the trailer lights operate correctly with the vehicle. The towbar supplies the physical mounting point, while the wiring connects brake, indicator and tail lights. Using a proper harness helps protect the Jolion’s electronics. Most installers can supply and fit both the bar and suitable wiring in one booking.

Q: Will this towbar affect my rear ground clearance significantly?

The towbar usually sits close to the original bumper height, so changes to departure angle are minor. You may notice the receiver or towball is now the lowest point at the rear. Take extra care over sharp spoon drains or steep driveway exits. Driving slightly diagonally over obstacles can help keep the bar from scraping on rougher tracks or high kerbs.

Vehicle compatibility: Haval Jolion SUV petrol models built from February 2021 onwards only.