This TAG Heavy Duty Towbar suits the Haval H6GT B03 series from early 2021 and lets you hook up box trailers, small campers or bike racks without drama. The bar tucks in under the rear bumper and keeps departure angle reasonable for gravel drives or shallow tracks. The 50 mm square hitch takes standard drawbar mounts so you can swap between a towball tongue and accessory carriers as your trips change.

The towbar runs a welded steel cross tube across the full rear width with side plates around 5–6 mm thick tying into existing chassis points. A 50 mm receiver section gives you solid engagement with typical hitch pins. The brackets use pre-drilled holes that match the H6GT mounting pattern so the gear sits straight and tight once torqued up. Tag backs this style of bar as a smart buy for anyone wanting consistent towing performance on Aussie roads.

• Heavy duty towbar for Haval H6GT B03 series
• Suits vehicles built from 01/2021 onwards
• Rear chassis mounted under the bumper
• Features standard 50 mm square hitch receiver
• Steel cross tube spans full rear width
• Side mounting plates bolt to factory holes
• Compatible with 50 mm towball mounts and carriers
• Towbar sits close to bumper to limit overhang
• Suitable for general towing within vehicle ratings
• Professional installation and separate wiring harness recommended

Q: Does this towbar fit all Haval H6GT models from 2021?

It fits Haval H6GT B03 series vehicles built from 01/2021 onwards. Always match the B03 series code with your build plate before ordering. Different series can have alternate mounting points or bumper shapes. If your wagon is an earlier shape or non-GT variant, this towbar will not be the right gear.

Q: What hitch size does the TAG Heavy Duty Towbar use?

This towbar uses a standard 50 mm square hitch receiver. That size matches most towball tongues, bike racks and recovery hitches sold in Australia. Using the common size makes it easier to swap gear between vehicles. Just make sure any accessory you run also suits a 50 mm receiver.

Q: Can I use this towbar for towbar-mounted accessories only?

Yes, you can use the hitch for towbar-mounted accessories within the vehicle’s rated limits. Things like bike carriers or small platforms work off the same 50 mm receiver. Just check the tongue weight limits for your Haval H6GT before loading up. Overloading the receiver with static weight can still stress the rear chassis.

Q: Do I need a separate wiring kit for trailer lights?

Yes, trailer wiring is handled by a separate harness and plug. The towbar provides the physical mounting point only. A dedicated wiring kit keeps the H6GT electronics happy and helps avoid warning lights. Most installers will recommend a vehicle-specific harness for a cleaner job and better reliability.

Vehicle make: Haval. Vehicle model: H6GT B03 series. Model years: 01/2021 onwards. Towbar type: heavy duty. Towbar mount: rear chassis mounted under bumper. Compatibility: H6GT body style shown in images only. Fitment position: centre rear with 50 mm towball attachment. Intended use: towing trailers and carrying towbar-mounted accessories. Professional installation recommended by a qualified fitter. Wiring harness or trailer plug may be required and is sold separately.