The TAG Heavy Duty Towbar for the GWM Cannon Alpha Styleside Ute from 04/2024-on gives your ute a solid hitch point for box trailers, camper trailers and small vans, using the existing chassis mounting spots and keeping departure angle close to standard height. With a heavy-duty rating suited to regular towing, it lets you load up for weekends away or site runs without relying on temporary clamp-on gear.

The towbar uses thick steel side plates and a heavy cross tube to spread towing forces along the GWM chassis rails, with high-tensile bolts locking it in place for repeat use on corrugated roads. A hard-wearing black finish helps the steel handle wet coastal air and stone spray from gravel tracks. Pair it with an appropriate towball and wiring kit matched to your trailer plug and you have a practical, smart buy for Cannon Alpha setups.

• Heavy duty towbar for GWM Cannon Alpha Styleside Ute
• Suits vehicles built from 04/2024 onwards
• Rear-mounted bar using chassis attachment points
• Provides fixed hitch point for trailers and tow setups
• Compatible with styleside tub body configuration
• Finished in dark protective coating for corrosion resistance
• Includes side mounting plates with multiple bolt holes
• Towbar layout maintains practical rear ground clearance
• Suited to regular towing for work or recreation
• Designed to integrate with factory rear body lines

Q: Does this towbar fit all GWM Cannon Alpha models?

This towbar suits GWM Cannon Alpha Styleside Ute models built from 04/2024 onwards. Earlier build dates or other body styles may have different mounting points. Always check your compliance plate for the build month and confirm the body is a styleside tub, not a cab chassis. If your ute falls outside that range, you will need a different bar.

Q: Can I still use my rear tub and tailgate normally?

Yes, the bar mounts under the rear of the chassis so the tailgate and tub floor remain clear. You can keep loading tools, camping gear or bikes over the tailgate as usual. Only the hitch sits below bumper level at the back. Just be mindful of the extra length when reversing near walls or posts.

Q: Do I need extra wiring with this towbar?

The towbar itself is just the mounting hardware and hitch point, so trailer wiring is a separate piece of the setup. You will need a harness and trailer plug that match your trailer lights. Many auto electricians can supply vehicle-specific looms. Wiring should be installed to meet local road rules.

Q: Is this bar suitable for off-road use?

The heavy duty design is aimed at regular towing, including trips on graded dirt and gravel roads. Departure angle is close to standard, but any rear-mounted bar can touch down on steep washouts. Drive to the conditions, and take extra care on sharp ruts, rock steps or deep spoon drains to avoid grounding the hitch.

Vehicle make: GWM. Vehicle model: Cannon Alpha Styleside Ute. Vehicle body: styleside ute. Build date range: 04/2024 onwards. Towbar type: heavy duty towbar. Fitment position: rear of vehicle chassis.