The TAG Direct Fit Wiring Harness hooks your towbar electrics into factory wiring on Volkswagen Polo, Skoda Fabia and Skoda Rapid so your trailer lights match every pedal and stalk input. The loom length suits small hatch bodies around the 4 m mark, so you are not left with coils of spare cable to tie off. The setup suits 12 V trailer lighting circuits and standard 7-pin style connections used across most Aussie box trailers. The kit runs multi-core copper cable sized for trailer lighting loads up to about 15 A total, so brake, tail and indicator lamps all get consistent voltage. Insulation thickness sits around the usual 1–2 mm range to handle stone spray and heat from Aussie bitumen. Connectors fit behind trim spaces less than 40 mm deep, which keeps everything tucked up and tidy. It is smart buy gear for drivers wanting towbar wiring that matches their specific model.

• Direct fit wiring harness by TAG
• Suits Volkswagen Polo 04/2014–08/2017
• Suits Skoda Fabia from 11/2014 on
• Suits Skoda Rapid from 06/2015 on
• Intended for 12 V trailer lighting circuits
• Vehicle specific style harness for towbar setups
• Helps avoid cutting factory wiring looms
• Suitable for small hatchback towing applications
• Works with towbar mounted trailer socket locations
• Matches typical 7-pin trailer plug style layouts

Q: Does this wiring harness support the listed Volkswagen and Skoda models only?

Yes, this harness is specified for Volkswagen Polo 04/2014–08/2017, Skoda Fabia from 11/2014 on, and Skoda Rapid from 06/2015 on. The connectors and cable lengths suit these body shapes. Using it on other vehicles may leave plugs that do not match. Matching the build month and year of your car to these ranges is important before ordering.

Q: Is this harness suitable for standard 12 volt trailer lighting circuits?

Yes, the harness is intended for standard 12 volt trailer lighting loads. Typical box trailers and small campers in Australia use 12 volt lamps, either incandescent or LED with built in resistors. The loom routes power from the vehicle lighting circuits to the trailer plug. Always check that your trailer wiring and plug match the vehicle side connector.

Q: Can this harness help avoid cutting into the factory wiring loom?

Yes, the main advantage of a direct fit harness is that it connects at designated points without cutting into the original loom. This can help keep the vehicle wiring closer to factory condition. It may also simplify diagnosis if you ever need electrical work later. Correct installation is still important for long term reliability.

Q: Do I need extra brackets or sockets to use this harness?

The harness is intended to work with a towbar setup that includes a suitable mounting point for the trailer socket. Many towbars have a flat plate near the receiver for this purpose. If your towbar does not have a socket mount, you may need a separate bracket. The harness then runs from the vehicle interior to that mounting location.

Compatible vehicles:

• Volkswagen Polo built from 04/2014 to 08/2017
• Skoda Fabia built from 11/2014 on
• Skoda Rapid built from 06/2015 on