The TAG Direct Fit Wiring Harness is set up for MERCEDES-BENZ Vito and Mixto vans from 10/2014 onward, so you know it matches the body shape and factory loom. Plug the kit into the rear electrics and you are ready to run a standard trailer plug on 12V systems over a few metres of shielded cable. That means your van can tackle regular towing runs without hacked together wiring.

The kit includes an automotive-grade multi-core cable, a compact control module, and a trailer socket housing sized for common towbar plates around 7 cm wide. Every connector is shaped to match the Vito layout, which keeps the setup neat and reduces strain when you bounce along corrugated roads. For anyone running a work or touring van, this is a smart buy that keeps the electrics tidy and built tough for Aussie conditions.

• Direct fit wiring harness for towbar setups
• Suits MERCEDES-BENZ Vito from 10/2014-on
• Also suits MERCEDES-BENZ Vito Mixto 10/2014-on
• Vehicle specific loom for factory-style finish
• Includes trailer socket housing and control module
• Multi-core automotive cable for 12V systems
• Ideal for trade and touring vans towing trailers
• Integrates towbar wiring with rear vehicle electrics
• Supplied with printed wiring kit instructions
• Packaged as a complete towbar wiring kit

Q: Does this wiring harness include the trailer socket?

Yes, the kit includes a trailer socket housing. The socket mounts to the towbar plate and connects to the included loom. That means you receive the main parts needed at the rear of the van. You still need a compatible towbar fitted to the vehicle. A professional installer can confirm the socket mounting position.

Q: Is this harness suitable for both Vito and Mixto body styles?

Yes, this harness suits MERCEDES-BENZ Vito and Vito Mixto from 10/2014 onward. The connectors are shaped to match the shared platform wiring across these variants. That makes it a straightforward choice if you run a mix of cargo and crew vans. Always confirm your build date before ordering.

Q: Can I install this kit at home?

The kit is vehicle-specific, but professional installation is recommended. Modern vans run sensitive electronics that can be affected by incorrect wiring. An auto electrician or towbar specialist will have the tools and wiring diagrams. That keeps your van and trailer lights working as intended.

Q: Will this harness work with standard 12V trailer lighting in Australia?

Yes, the harness is intended for standard 12V trailer lighting setups. The loom carries power and signals from the van to typical trailer light circuits. This suits box trailers and similar loads that use common Australian 12V lamps. Always check your trailer wiring condition before use so the system is not overloaded.

• Suits MERCEDES-BENZ Vito built from 10/2014-on
• Suits MERCEDES-BENZ Vito / Mixto built from 10/2014-on
• Vehicle specific wiring harness for towbar setups
• For use on vehicles equipped as shown in product images
• Professional installation recommended for correct integration