This Coast to Coast S/S Flexible Hose 450mm with hand wheel hooks a single POL gas bottle to a 1/4 inch NPT inlet on your regulator or gas gear. The 450mm length suits standard caravan gas lockers where the cylinder sits close to the fixed bracket. You get straightforward connection for single bottle kits without extra hose looping around and getting in the way of other storage. The stainless steel braided hose at 450mm long handles bumps from gear in the front boot on corrugated roads. The POL to 1/4 inch NPT male layout lines up with typical Aussie caravan and RV gas setups, so it drops into most single cylinder arrangements as long as the fittings match. The hand wheel gives solid purchase on the POL valve, so you can nip it up neatly without reaching for a spanner every time you swap bottles.

• Stainless steel flexible gas hose for single bottle kits
• Suits caravan and RV gas systems
• Hose length of 450mm for compact spaces
• POL connection at cylinder end
• 1/4" NPT male connection at outlet end
• Integrated hand wheel for tool free POL tightening
• Classified as gas hose / pigtail to suit single cylinder
• Flexible construction helps routing in tight gas lockers
• Stainless braid provides added mechanical protection over hose

Q: Can this hose be used with any gas regulator that has a 1/4" NPT port?

Yes, this hose suits regulators or fittings with a 1/4" NPT female port. The outlet end of the hose is a 1/4" NPT male thread, so it screws directly into compatible caravan and RV gas regulators or manifolds. Always check the thread in your existing setup before purchase. A licensed gas fitter should confirm compatibility during installation.

Q: Is this hose suitable for use on a dual cylinder changeover setup?

This hose is described for single bottle gas kits. Dual cylinder setups generally require specific changeover hardware and additional hoses matched to that system. Using a hose intended for a single cylinder on a different style of setup can affect layout and compliance. Speak with your gas fitter to confirm what your particular changeover valve requires.

Q: Can I install or replace this gas hose myself on my caravan?

Gas work should be carried out by a licensed gas fitter. Swapping hoses, regulators or fittings on a caravan gas system involves leak testing and checking compliance with relevant gas standards. A licensed tradesperson has the right tools for pressure testing and will ensure the hose length and routing are correct. This keeps your setup aligned with regulations and manufacturer guidance.

Q: How often should a flexible gas hose like this be inspected?

Flexible gas hoses should be visually checked on a regular basis and included in scheduled gas inspections. Caravan and RV gas components can be exposed to vibration and movement on the road, so periodic checks help pick up wear or damage early. Your gas fitter can advise on an inspection interval that suits how often you tow. Replace the hose immediately if damage or corrosion is found.

• Suits single bottle gas kits using POL connection
• Connection type: POL inlet to 1/4" NPT male outlet
• Suitable for caravan and RV gas setups using a single cylinder
• Install only to compatible gas regulators and valves by a licensed gas fitter