The RM Williams Longhorn 70cm Decal Sticker throws a 70cm long Longhorn logo across the panel so your rig stands out in the car park or at camp. The strip length works well across most ute tailgates and rear windows that measure more than 70cm clear space. The low profile height of only a few centimetres keeps the look clean while still being easy to spot from several metres away on track or highway pull-ins.

The decal uses a thin vinyl-style film only fractions of a millimetre thick so it sits flat against metal or glass and shrugs off normal door movement. The white artwork pops best on dark panels with colour values under about 50% brightness. The single-piece layout at 70cm wide means no joins across the horn span which keeps edges tidy over the long haul. The lightweight construction adds just a few grams, so it will not stress glass or canopy doors on corrugated roads.

• RM Williams branded Longhorn decal sticker
• Iconic Longhorn logo graphic
• Approximate overall length of 70cm
• Suits flat metal or glass surfaces
• Ideal for ute tailgates and rear windows
• Low profile height for clean look
• Lightweight film construction adds minimal weight
• White artwork contrasts well on dark panels
• Single-piece strip for straightforward placement
• Suitable for vehicles and other flat gear surfaces

Q: Where can I fit the RM Williams Longhorn 70cm Decal Sticker on my vehicle?

You can fit it to any clean, flat metal or glass surface with at least 70cm of width. Common spots are ute tailgates, rear windows, and canopy doors. Avoid curved or heavily ribbed panels so the film can sit flat. Always clean off dust, wax, and silicone before you stick it down.

Q: Can this 70cm Longhorn decal be used on gear other than vehicles?

Yes, it can be used on toolboxes, fridges, drawers, and other flat equipment surfaces. Just make sure the area is smooth, dry, and wide enough for the 70cm length. The decal suits painted steel, aluminium, and many plastics. Test a small corner if you are unsure about how the adhesive reacts with a surface.

Q: Will the decal add noticeable weight to glass or lightweight panels?

No, the decal is extremely light and only weighs a few grams. The thin film construction means it has virtually no effect on window mechanisms. You can use it on rear glass without worrying about extra load on struts. It also suits lightweight canopy doors and plastic panels where extra hardware would be too heavy.

Q: Can I cut the 70cm decal to fit a smaller space?

Yes, you can trim the ends if you have a narrower panel than 70cm. Use a sharp blade or scissors and cut from the backing side to keep the edge clean. Just avoid cutting into the Longhorn head section so the logo still looks balanced. Measure your panel first so you only remove what you need.

Sticker suits flat smooth surfaces such as vehicle panels glass toolboxes and hard cases. Length of approximately 70cm suits larger areas like ute canopies doors and rear windows. Surface must be clean and dry before application. No specific vehicle make or model fitment is listed.