The Redback 4x4 Muffler Sound Option is a twin muffler delete pipe that swaps into the factory exhaust on Toyota LandCruiser 76 and 79 Series from 03/2007 to 09/2022. You pull the stock twin mufflers and bolt this straight twin pipe in their place, keeping the same flange spacing and pipe diameter so the rest of the system stays untouched. It is a smart buy if you want more note without redoing the whole exhaust.

The assembly uses steel tube sized to the standard LandCruiser exhaust diameter over roughly 1 m of pipe length. Welded flanges at each end share the OEM bolt pattern, which keeps the seal tight with the existing gaskets and hardware. A dark protective coating helps the section handle dust, mud and spray on Australian back roads. This is straightforward gear that does its job and lets you get out there.

• Redback 4x4 twin muffler delete pipe assembly
• Suits Toyota LandCruiser 76 Series from 03/2007 on
• Suits Toyota LandCruiser 79 Series 03/2007–09/2022
• Replaces factory twin mufflers with straight twin pipes
• Maintains factory-style flange locations for alignment
• Steel construction with welded twin tube layout
• Dark coated finish for basic corrosion protection
• Fits into existing exhaust system without rerouting
• Aims to increase exhaust sound compared to stock
• Suitable upgrade for touring and work setups looking for more note

Q: Will this muffler delete fit a Toyota LandCruiser 200 Series?

No, this muffler delete is made for Toyota LandCruiser 76 and 79 Series only. The flange positions and pipe layout match those chassis, not the 200 Series. Using it on a different model would cause alignment issues. Always match the kit to the exact series and build year range listed.

Q: Do I need to modify the rest of the exhaust to run this kit?

No, the twin muffler delete is intended to bolt in where the factory twin mufflers sit. The front and rear sections of the standard exhaust remain in place. A fitter will usually reuse the existing flange positions. Check that your current system has not been altered before installation.

Q: Will installing this affect vehicle ground clearance off-road?

In most cases, ground clearance will be similar to the original muffler section. The twin pipe assembly follows the same basic route under the chassis. This helps keep clearance around crossmembers and suspension. Still, it is worth checking clearances after fitment, especially on lifted vehicles.

Q: Is any extra hardware normally required for installation?

Typically, you will need suitable gaskets and fasteners for the flange joints. Many fitters replace old hardware as a matter of course. Fresh bolts and nuts help achieve a reliable seal at each flange face. Your exhaust shop can supply the correct consumables at installation time.

• Suits Toyota LandCruiser 76 Series wagon built from 03/2007 onwards
• Suits Toyota LandCruiser 79 Series single and dual cab built from 03/2007 to 09/2022
• Fits in place of the original twin muffler section
• Professional installation recommended by a qualified exhaust specialist
• Check local regulations regarding exhaust noise and emissions before fitment