This Tycab Red/Black 2 B&S Twin Core Marine Flat Twin Sheath cable is sold per 1 m length so you only buy what your setup needs. With a 230A rating it suits high‑draw 12 volt gear like inverters and big chargers without struggling on longer feeds. The twin 2 B&S cores give you serious copper cross‑section so voltage drop stays manageable on runs over 3 m if you size it right. The cable uses red and black conductors inside a flat black outer sheath so tracing polarity across each 1 m section stays simple. The flat profile packs tighter than round twin for those narrow channels between battery boxes and drawer systems that only give you about 20 mm to play with. Tycab marine‑grade construction is a smart buy for Aussie conditions where gear cops heat over 40°C and plenty of vibration on corrugated roads.

• Tycab 2 B&S twin core marine cable
• Red and black conductors for polarity ID
• Flat black twin sheath for compact routing
• Rated to carry up to 230A current
• Suitable for high‑draw 12V and 24V circuits
• Sold per metre for custom cable lengths
• Ideal for battery to inverter or fuse box feeds
• Marine‑grade construction for demanding installs
• Twin core layout simplifies positive and negative runs
• Black outer sheath keeps installations looking tidy

Q: Is this Tycab 2 B&S twin core cable supplied as a continuous length?

Yes, it is sold per metre as a continuous length where possible. If you order 5 units you will normally receive one 5 m length. This makes it easier to run a single cable from your battery to your fuse block without extra joins. If a continuous run is not possible the store will usually contact you before cutting.

Q: Can this 2 B&S marine cable be used in 24V systems as well as 12V?

Yes, the Tycab 2 B&S twin core marine cable can be used on both 12V and 24V DC systems. The 230A rating relates to current, not voltage, so it will comfortably handle high‑draw 24V loads within normal voltage‑drop limits. Many touring and marine setups use this gauge for main feeds to inverters and distribution panels. Always size by current and run length.

Q: Is the outer sheath flexible enough to run around tight bends?

The flat twin sheath is flexible for most vehicle and boat installs. The 2 B&S conductors still have a large cross‑section, so bends should be kept with a radius of several centimetres rather than sharp corners. Using saddles or clips every 300–500 mm helps the cable hold its shape. Avoid kinking the cable near lugs to maintain current capacity.

Q: Does this cable come pre‑terminated with lugs?

No, this Tycab 2 B&S twin core cable is supplied as bare cable only without lugs fitted. This lets you choose the exact lug size and style for your battery posts, bus bars, or studs. You can crimp or clamp the terminations that best suit your setup. Many auto‑elecs prefer to crimp heavy‑wall lugs for 2 B&S using a proper hex or hydraulic tool.