PSR's Nissan Patrol GQ-GU weld on rear coil tower brace is designed as a permanent solution to the chassis' fragile rear towers. Made from 6mm 350MPA steel it features 4 folded corner ears that once welded fish plate the area prone to cracking on the front and rear side of the tower are. It also has side folds to run on the top edge of the rails further supporting chassis movement and reducing overall stress on your chassis. Another critical feature is the step in the rear edge to clear the factory proportioning valve and brake lines. Without this step the competitor's product requires you to bend the factory brake lines to clear the brace potentially causing brake line failure. The PSRPAT-078 is supplied raw ready to weld on. The clever design also allows the mounting of a remote reservoir to the top side of the brace in 2 positions using additionally purchased PSRUNI-087 (one kit per reservoir). If you're not confident with welding this brace onto your chassis then please see our bolt on solution, PSRPAT-011.