The OZtrail 175 x 4mm Galvanised Peg is the sort of small bit of gear that keeps camps honest when the wind clips around 20 km/h and the tarp starts to flap. At 175 mm long and 4 mm thick it works well for lighter tents and shade setups where you want a few extra anchor points without loading the peg bag. Sold individually it lets you top up the kit after the rocky sites bend a couple.

This peg runs a simple galvanised steel shaft with an L-shaped head and a straight 175 mm shank, so you know exactly how it will behave in firm soil. The galvanised coating is there to slow down rust when the ground stays damp for 24 hours or more after rain. That straightforward build makes it a smart buy for Aussie trips where losing or bending gear is just part of the game.

• OZtrail galvanised steel tent peg
• Length: 175 mm for compact carry
• Diameter: 4 mm round bar
• Galvanised finish for rust resistance
• Simple L-bend head for guy ropes
• Suits light tents, tarps and awnings
• Ideal as spare or replacement peg
• Sold individually for flexible quantities
• Steel construction handles regular campsite use
• Compact size fits standard peg bags

Q: Is this peg sold as a single unit or in a pack?

This peg is sold individually. You can add exactly as many pegs as you need to your kit instead of buying a fixed pack size. That works well if you are replacing a few bent stakes from an existing setup. It also lets you build a mixed kit with different sizes. Each unit is the same 175 x 4 mm galvanised steel peg.

Q: What type of tents or shelters suit a 175 x 4mm peg?

It suits lighter tents, tarps and small awnings. The 175 mm length gives enough bite in firm or moderately compacted soil. The 4 mm bar thickness works well for guy ropes or light webbing loops. It is not aimed at big canvas touring tents that see heavy wind loads. For those, many campers step up to longer or thicker pegs.

Q: Can this galvanised peg be used in sandy or very soft ground?

It is not ideal for loose sand or very soft soil. Shorter and thinner pegs tend to pull through in sand because there is less surface area gripping the ground. In those conditions broader sand pegs or longer stakes usually give better holding power. This peg performs best in firm dirt or grass where a 175 mm depth can lock in. Many campers keep a mix of peg styles for different campsites.

Q: Do I need special tools to drive this peg in?

A standard camping mallet or small hammer is suitable. The straight 4 mm steel shaft handles typical hammer blows for light duty use. A rubber or plastic headed mallet helps protect the galvanised coating. Avoid striking rocks directly as that can bend the bar. Checking the peg after each trip and replacing any badly bent ones keeps your setup reliable.